Industrial

The ELM334 is a handy circuit for remotely monitoring the position of your garage door. A two-wire interface is all that is needed to convey the position of the door to two remotely located LEDs, and to also provide control for an electric opener if desired.

The Agilent T7111 ATC Probe is a temperature probe designed for measuring temperature with the Agilent 3200 series meters. It has a temperature range of 0-100°C with an accuracy of ±0.3°C (0-60°C) and ±1.0°C (60-100°C). The probe features a stainless steel measuring tip with a diameter of 4mm and a length of 120mm. To use the probe, it should be immersed in the sample solution with a depth of at least 10mm, and the stable reading should be recorded. Avoid applying force to the probe cap, cable, or cable interface, and keep the cable interface dry. For any troubleshooting during probe use, contact Agilent Technologies customer service. Store the probe in a storage box at ambient temperature and dry conditions.

EL6275C is a four channel laser diode current amplifier that pro- vides controlled current to a grounded laser diode.

EL2244 and EL2444 are dual and quad versions of the popular EL2044. They are high speed, low power, low cost monolithic operational amplifiers built on Elantec's proprietary complementary bipolar process. The EL2244 and EL2444 are unity-gain stable and feature a 325V/µs slew rate and 120MHz gain-bandwidth product while requiring only 5.2mA of supply current per amplifier. The power supply operating range of the EL2244 and EL2444 is from ±18V down to as little as ±2V. For single- supply operation, the EL2244 and EL2444 operate from 36V down to as little as 2.5V. The excellent power supply operating range of the EL2244 and EL2444 makes them an obvious choice for applications on a single +5V or +3V supply. The EL2244 and EL2444 also feature an extremely wide output voltage swing of ±13.6V with VS = ±15V and RL=1kΩ. At ±5V, output voltage swing is a wide ±3.8V with RL = 500Ω and ±3.2V with RL = 150Ω. Furthermore, for single-supply operation at +5V, output voltage swing is an excellent 0.3V to 3.8V with RL = 500Ω. At a gain of +1, the EL2244 and EL2444 have a -3dB bandwidth of 120MHz with a phase margin of 50°. Because of their conventional voltage-feedback topology, the EL2244 and EL2444 allow the use of reactive or non-linear elements in their feedback network. This versatility combined with low cost and 75mA of output-current drive make the EL2244 and EL2444 an ideal choice for price-sensitive applications.

This datasheet provides detailed information on the EA2 series, including product features, applications, and external dimensions.

DS3050W is a single-piece 4Mb nonvolatile SRAM memory module from Maxim Integrated, which integrates a real-time clock (RTC) and a rechargeable manganese lithium battery.

The DS1780 CPU Peripheral Monitor monitors CPU temperature, voltage, and fan speed. It also features chassis intrusion detection and remote system reset.

The DS1721 2-Wire Digital Thermometer and Thermostat provides 12-bit temperature readings, which indicate the temperature of the device. Thermostatic settings and temperature readings are all communicated to/from the DS1721 over a simple 2-wire serial interface. No additional components are required; the device is truly a "temperature-to-digital" converter. The DS1721 has three address bits that allow a user to multidrop up to eight sensors along the 2-wire bus, greatly simplifying the bussing of distributed temperature sensing networks.

Agilent 3200D Dissolved Oxygen Meter Operating Guide, introduces the product's usage methods, function features and other information.

The DR1P5 series offers 1.5 watts of output power with low output ripple and noise, high efficiency, and 500VDC isolation voltage. These products are particularly suitable for telecommunications, industrial, mobile telecom, and test equipment applications.

This document is the user guide for the Agilent Technologies Agilent 3200I Ion Meter, providing instructions for use and important information.

This datasheet provides information about the IXYS DGSK 36-03CS diode, including the package, technical parameters, and applications.

The Agilent I9131 Sodium Combination ISE from Agilent Technologies is capable of measuring sodium ion (Na+) concentration in laboratory settings. This electrode is designed for use with the 3200I Ion Meter or similar devices. WARNING: Follow the operating manual to prevent personal injury. WARNING: The electrode solution can cause chemical burns or illness if ingested or in contact with human skin. Use protective clothing or gloves to avoid contact. In case of contact, rinse the affected area with tap water or DI water thoroughly. CAUTION: The electrode body is made of glass. Handle with care to prevent damage to the instrument.