Industrial

To ensure food safety and safeguard human health, the characterization of the elemental composition of a wide range of food types is required. The possibility of measuring all the required elements with a single configuration using the Agilent 7700x ICP-MS is investigated. The determination of trace and major elements simultaneously is possible due to the 9 orders of magnitude provided by the detector. Collision cell technology with a single cell gas, helium, is used to eliminate interferences generated by the plasma and the sample matrix. The use of a discrete sampling system to increase sample throughput is also evaluated.

ADuM1200/ADuM1201 is a dual-channel digital isolator with isolation function. It adopts a narrow body SOIC8-lead package, works at 5V/3V, and its operating temperature is -40°C~105°C. It supports bidirectional communication and has a maximum data rate of 25Mbps.

This application note describes an ultrafast SPE/MS/MS method, using the Agilent RapidFire High-Throughput Mass Spectrometry System, with a sample analysis time of <10 seconds per sample, for the analysis of levetiracetam in human serum. The Agilent RapidFire/MS System exhibited comparable accuracy, precision, linearity, and sensitivity to LC/MS/MS, but with a sample analysis cycle time 10-fold faster than LC/MS/MS.

The ADuM1100 is a digital isolator with high data rate, compatibility with 3.3V and 5.0V operation, low power consumption, and high common-mode transient immunity.

This document mainly introduces Agilent 8800 triple quadrupole ICP-MS innovative reaction cell technology, which can effectively eliminate oxide polyatomic ion interference

This study focuses on the rapid screening of an entire hippocampus section of mouse brain for the study of Alzheimer’s disease. The aim was to investigate whether there was a correlation between the tissue’s chemical composition and protein secondary structure with tissue morphology, in order to provide insight into the disease process. Agilent’s 670 and 620 FTIR imaging analysis, combined with a chemical imaging microscope and FTIR spectrometer, were used for this research.

This application note introduces the Chinese Pharmacopoeia 2010 edition limit requirements for heavy metals and describes the application of Agilent Technologies 's microwave plasma atomic emission spectrometry (MP-AES) in the determination of heavy metal content in Chinese herbal medicines.

TEW5736 is a transmit or receive transformer designed for use in the ISDN primary rate access network, interfacing the Siemens PEB2235 and PEB2236 devices. It complies with ANSI T1.408 and CCITT I.431 standards, with regards to Longitudinal Balance and with T1.408 and G.703 for the return Loss. When in transmit mode, the two primary windings should be connected in parallel, pin 2 to 3 and pin 5 to 4. When in receive mode, the two primary windings should be connected in series, pin 5 to pin 3. Typical applications include primary rate ISDN network nodes, PBX or computer to T1/CEPT Digital Trunks, and TDM Multiplexers.

This is a high current buffer/driver that can drive large MOSFETs and IGBTs. It has good anti-interference ability and can work at 3V to 18V voltage.

The TLSI T73327/73327A is a low-cost, low-jitter Voltage-Controlled-Crystal-Oscillator. The device accepts a 15 MHz-36 MHz crystal input and produces a low-jitter output at the same frequency. A 0V to +3.3V control signal is used to fine-tune the output clock frequency in the ±120ppm range.