Industrial

5420 Dual 4-Input NAND Gates is a digital integrated circuit produced by National Semiconductor Corporation. It can perform logic NAND function.

This document describes the features and characteristics of the DM7420 dual 4-input NAND gate produced by Fairchild Semiconductor Corporation.

This is a synchronous reversible up-down counter with mode control. It is a 4-bit binary counter. Synchronous operation is achieved by clocking all flip-flops simultaneously, so that the outputs change simultaneously when instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple clock) counters. The outputs of the flip-flops are triggered on a low-to-high level transition of the clock input, if the enable input is low. A high enable input inhibits counting. Level changes at either the enable input or the down-up input should only be made when the clock input is high. The direction of the count is determined by the level of the down-up input. When low, the counter counts up, and when high, it counts down. This counter is fully programmable, meaning the outputs can be preset to any level by placing a low on the load input and entering the desired data at the data inputs. The output will change independent of the level of the clock input. This feature allows the counters to be used as modulo-N dividers by modifying the count length with the preset inputs. The clock, down-up, and load inputs are buffered to lower the drive requirement, which significantly reduces the drive requirement.

The MCM69R737A/819A is a 4M-bit synchronous late write fast static RAM designed to provide high performance in secondary cache and ATM switch, Telecom, and other high speed memory applications.

This document describes the TLF6561 DM74184 and DM74185A BCD-to-Binary and Binary-to-BCD Converters. These converters allow direct read-out of converted codes and demonstrate the versatility of read-only memory. The converters can be cascaded, have an overriding enable input, and open-collector outputs.

The MCM6706B is a 32K x 8 bit static random access memory from Motorola. It is a fully static memory that does not require external clocks or timing strobes. It has three-state outputs and can be selected to have access times of 8ns, 10ns, or 12ns.

The MC74LVQ373 is a high performance, non–inverting octal transparent latch operating from a 2.7 to 3.6V supply

This document provides technical data and features of Motorola M68HC08 series microcontrollers. It includes detailed information on two models, MC68HC908GR8 and MC68HC908GR4.

MC44BC375/U/J/T is a VHF Audio/ Video High Integration Modulator ICs produced by Motorola. It has three versions: MC44BC375U, MC44BC375J and MC44BC375T, which are used for different frequency modulation.

This document is the MC1413/D technical data manual, which introduces the features and characteristics of the product, including pin connections, packages, operating temperature range, and maximum ratings.

The MC10/100EP32 is an integrated ÷2 divider with differential CLK inputs. It has a typical propagation delay of 350 ps and a maximum frequency greater than 4 GHz. It can operate in a voltage range of 3.0 V to 5.5 V and features open input default state and safety input clamp.

DM5417/DM7417 is a six-channel buffer that can implement buffer function for each gate. These open-collector outputs need external pull-up resistors for proper logical operation.