Industrial

This is a manual for the embroidery machine PR-1000. The manual includes information on the trademarks, copyrights, and licenses for the software used in the machine.

This document provides trademark and copyright information for FlashFX® and FlashFX® Pro™, as well as video powered by Mobiclip™ encoding and playback technology. It also includes the Intel License Agreement for Open Source Computer Vision Library.

This file introduces the DAC08 product. It is an 8-bit, high-precision, high-speed, gain-variable DAC that can be connected to TTL, CMOS, ECL, HTL, and PMOS logic levels. The product features high accuracy, high speed, and low power consumption.

The DAC08 is a high-speed, 8-bit, multiplying D/A converter with low cost and outstanding application flexibility. It features a 20:1 reference current range, 85 ns settling time, low power consumption, and TTL, CMOS, ECL, HTL, and PMOS logic interfaces.

The DAC0890 is a complete dual 8-bit voltage output digital-to-analog converter that can operate on a single 5V supply. It includes on-chip output amplifiers, precision bandgap voltage reference, and full microprocessor interface. Each DAC0890 output amplifier has two externally selectable output ranges, 0V to 2.55V and 0V to 10.2V. The amplifiers are internally trimmed for offset and full-scale accuracy and therefore require no external user trims. The DAC0890 is supplied in a 20-pin ceramic DIP package.

The DAC088S085 is a fully featured, general purpose OCTAL 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to +5.5V supply and con- sumes 1.95 mW at 3V and 4.85 mW at 5V. The DAC088S085 is packaged in a 16-lead LLP package and a 16-lead TSSOP package. The LLP package makes the DAC088S085 the smallest OCTAL DAC in its class. The on-chip output ampli- fiers allow rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces. The DAC088S085 also of- fers daisy chain operation where an unlimited number of DAC088S085s can be updated simultaneously using a single serial interface.

The DAC0854 is a complete quad 8-bit voltage-output digital-to-analog converter that can operate on a single 5V supply. It includes on-chip output amplifiers, internal voltage reference, and a serial microprocessor interface. By combining in one package the reference, amplifiers, and conversion circuitry for four D/A converters, the DAC0854 minimizes wiring and parts count and is hence ideally suited for applications where cost and board space are of prime concern. The DAC0854 also has a data readback function, which can be used by the microprocessor to verify that the desired input word has been properly latched into the DAC0854’s data registers. The data readback function simplifies the design and reduces the cost of systems which need to verify data integrity. The logic comprises a MICROWIRETM-compatible serial interface and control circuitry. The interface allows the user to write to any one of the input registers or to all four at once. The latching registers are double-buffered, consisting of 4 separate input registers and 4 DAC registers. Double buffering allows all 4 DAC outputs to be updated simultaneously. The four reference inputs allow the user to configure the system to have a separate output voltage range for each DAC. The output voltage of each DAC can range between 0...

DAC0832LCM suppliers

The DAC0830/DAC0832 8-Bit µP Compatible, Double-Buffered D to A Converters. The DAC0830 is an advanced CMOS/Si-Cr 8-bit multiplying DAC designed to interface directly with the 8080, 8048, 8085, Z80®, and other popular microprocessors. A deposited silicon-chromium R-2R resistor ladder network divides the reference current and provides the circuit with excellent temperature tracking characteristics (0.05% of Full Scale Range maximum linearity error over temperature). The cir- cuit uses CMOS current switches and control logic to achieve low power consumption and low output leakage current errors. Special circuitry provides TTL logic input volt- age level compatibility. Double buffering allows these DACs to output a voltage corresponding to one digital word while holding the next digital word. This permits the simultaneous updating of any number of DACs. The DAC0830 series are the 8-bit members of a family of microprocessor-compatible DACs (MICRO-DAC™).

This document describes the abbreviations of the MONITOR bus, the functions and connection methods of each part, and the methods to adjust and control related parameters.

The document introduces the DAC0808 series, an 8-bit monolithic digital-to-analog converter (DAC), which features a full scale output current settling time of 150 ns, power consumption of only 33 mW, and a power supply voltage range of -4.5V to -18V.

ZXM61N03F is a low voltage N-channel enhancement mode MOSFET from Zetex, featuring low on-resistance and fast switching speed, ideal for high efficiency, low voltage, power management applications.

The DAC0800/DAC0802 8-bit digital-to-analog converters are high-performance, high-precision DACs produced by Texas Instruments, with a typical settling time of 100 ns and a maximum output current of ±18V, which can be used for measurement, control and other applications