Industrial

The document describes the features and characteristics of the 74F169 4-bit up/down binary synchronous counter, including synchronous counting and loading, up/down counting, modulo 16 binary counter, two count enable inputs for n-bit cascading, positive edge-triggered clock, built-in carry look-ahead capability, and presettable for programmable operation.

This document is the product specification for the 74F1604 Latch from Philips Semiconductors. The product features high impedance NPN base inputs, 16-bit wide data inputs, and multiplexed 8-bit outputs.

This document describes the features and characteristics of the 74F154 decoder/demultiplexer, including its 16-line demultiplexing capability, mutually exclusive outputs, and 2-input enable gate for strobing or expansion. The decoder accepts four active High binary address inputs and provides 16 mutually exclusive active Low outputs.

The 74F153 is a dual 4-input multiplexer that can select 2 bits of data from up to four sources selected by common Select inputs (S0, S1). The two 4-input multiplexer circuits have individual active-Low Enables (Ea, Eb) which can be used to strobe the outputs independently. Outputs (Ya, Yb) are forced Low when the corresponding Enables (Ea, Eb) are High. The 74F153 is the logic implementation of a 2-pole, 4-position switch where the switch is determined by the logic levels supplied to the common select inputs.

The 74F151A is an 8-input multiplexer with high speed, on-chip decoding, multifunctional capability, and complementary outputs. It can provide the ability to select from eight sources of data or control information in one package. The device can provide any logic function of four variables and the negation with correct manipulation.

The 74F148 8-input priority encoder is a Philips Semiconductors product with features such as code conversion, multi-channel D/A converter, decimal-to-BCD converter, cascading for priority encoding of “N” bits, input enable capability, priority encoding-automatic selection of highest priority input line, output enable-active Low when all inputs are High, group signal output-active when any input is Low.

This document describes the product specifications of the 74F139 Dual 1-of-4 decoder/demultiplexer. The device has two independent decoders, each accepting two binary weighted inputs and providing four mutually exclusive active-Low outputs. Each decoder has an active-Low Enable pin, which, when high, forces all outputs to be high. The device has multifunction capability.

This document describes the features and characteristics of the 74F132 Quad 2-input NAND Schmitt trigger. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals, and has greater noise margin than conventional NAND gates.

The 74F1245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both transmit and receive directions. The B port outputs are capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features an Output Enable (OE) input for easy cascading and Transmit/Receive (T/R) input for direction control. The 3-State outputs, B0–B7, have been designed to prevent output bus loading if the power is removed from the device.

74F1244 is an Octal buffer (3-State) produced by Philips Semiconductors. It is ideal for driving bus lines or buffer memory address registers. The outputs are capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two Output Enables, OEa and OEb, each controlling four of the 3-State outputs. The 74F1244 is pin and functionally compatible with the 74F244. The lower power and light bus loading features make it an ideal part to interface directly with MOS microprocessors.

The 74F1240/74F1241 are octal buffers that are ideal for driving bus lines or buffer memory address registers.

This document provides the product specifications for the 74F10 and 74F11 gate circuits from Philips Semiconductors. The 74F10 is a triple 3-input NAND gate with a typical propagation delay of 3.5ns and a typical supply current of 3.3mA. The 74F11 is a triple 3-input AND gate with a typical propagation delay of 4.2ns and a typical supply current of 5.3mA.

74F07 is a six-tube open-collector output driver produced by Philips Semiconductors. It has high speed, 12V output termination voltage and other features.

This document introduces the product specifications of Philips Semiconductors, including the features and characteristics of four inverter/buffer drivers: 74F06, 74F06A, 74F07, and 74F07A. These include output drive capability, high speed performance, output termination voltage, etc.

74F06, 74F06A, 74F07, 74F07A are 6-channel open-collector output buffers produced by Philips Semiconductors.