Hitachi manuals, page 7
HITACHI 2SJ172 Silicon P-Channel MOS FET handbook
2SJ172 is a P-channel MOSFET from Nexperia. It features low on-resistance, high switching speed, low drive current, and is suitable for applications such as motor drive, DC-DC converter, power switch and solenoid drive.
HITACHI 2SJ173 handbook
HITACHI 2SJ174 handbook
HITACHI 2SJ175 Silicon P-Channel MOS FET handbook
2SJ175 is a Silicon P-Channel MOS FET. It features low on-resistance, high switching speed, low drive current, suitable for motor drive, DC-DC converter, power switch and solenoid drive.
HITACHI 2SJ176 handbook
HITACHI 2SJ177 handbook
HITACHI 2SJ130(L) 2SJ130(S) Silicon P-Channel MOS FET handbook(1)
2SJ130(L) and 2SJ130(S) are high voltage and high power switching tubes, using silicon P-channel MOSFET, with low on-resistance, high switching speed, low drive current, no secondary breakdown, etc. It is suitable for switching regulators, DC-DC converters and ultrasonic power oscillators.
HITACHI 2SJ130(L) 2SJ130(S) Silicon P-Channel MOS FET handbook
This document describes the application, features, and characteristics of 2SJ130(L), 2SJ130(S) silicon P-channel MOS FET. It is suitable for high-speed power switching, switching regulators, DC-DC converters, and ultrasonic power oscillators.
HITACHI HD61830/HD61830B LCDC (LCD Timing Controller) Data Sheet
HD61830/HD61830B is a dot matrix liquid crystal graphic display controller LSI from Toshiba, which stores the display data sent from an 8-bit microcontroller in the external RAM to generate dot matrix liquid crystal driving signals. It has a graphic mode in which 1-bit data in the external RAM corresponds to the on/off state of 1 dot on liquid crystal display and a character mode in which characters are displayed by storing character codes in the external RAM and developing them into the dot patterns with the internal character generator ROM. Both modes can be provided for various applications. Since it is produced by CMOS process, it can be used together with a CMOS microcontroller to complete a liquid crystal display device with lower power dissipation.
HITACHI HA178L00 Series handbook
The HA178L00 series is a three-terminal fixed output voltage regulator that can be used as stabilized power sources and Zener diodes. It features a maximum output current of 150mA, maximum power dissipation of 800mW, overcurrent protection, and temperature protection circuit.
HITACHI 2SB791(K) Manual
This document describes the basic parameters and characteristics of 2SB791(K) silicon PNP epitaxial medium speed and power switching complementary pair with 2SD970(K).
HITACHI HD74HCT563/HD74HCT573 Octal Transparent Latches (with 3-state outputs) handbook
The HD74HCT563/HD74HCT573 are octal transparent latches with 3-state outputs. When the latch enable (LE) input is high, the Q outputs of the HD74HCT563 will follow the inversion of the D inputs, while the Q outputs of the HD74HCT573 will follow the D inputs. When the latch enable goes low, data at the D inputs will be retained at the outputs until latch enabled returns high again. When a high logic level is applied to the output control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements.
HITACHI HD14075B handbook
This document contains information about HD14075, including dimensions, weight, and compatibility.
HITACHI HD14068B handbook
This document provides specifications for HD14068, including dimensions, weight, and technical requirements.
HITACHI HZM6.8MFA Silicon Planar Zener Diode for Surge Absorb Data Sheet
HZM6.8MFA is a silicon planar Zener diode that can absorb surge. It is packaged in a monolithic design with four devices. The MPAK-5 package is suitable for high density surface mounting and high speed assembly.