International Rectifier Manuals

The 163CNQ isolated center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free- wheeling diodes, and reverse battery protection.

The 6TQ series is a Schottky rectifier optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175°C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection.

HFA80FA120 is a fast soft recovery diode from IRF company. It features a fast recovery time, electrically isolated base plate, and large creepage distance between terminals. This diode can be used in applications such as HV power supplies, electronic welders, motor control and inverters.

300U(R) Series 300A is a standard recovery diode from IRF. It features high average current, large peak reverse voltage and low junction temperature. It is suitable for applications such as welders, power supplies, motor controls, battery chargers, etc.

This is an application description manual for the IRU3018.

The IRU1206 family of devices are ultra low dropout 1A regulators using PNP transistor as the pass element. These products are ideal when a single input supply is only available and the dropout voltage is less than 1V, exceeding the minimum dropout characteristics of NPN/ PNP hybrid regulators. One common application of these regulators is where input is 3.3V and a 2.5V output is needed. Besides the low dropout of less than 0.5V, other features of the family of the parts are: micro-power shut- down capability and output UVLO detection where Flag pin is switched low when output is below 5% of its nominal point.

IRF3711ZPbF is a power MOSFET produced by IRF company. It is mainly used in high frequency synchronous buck converters. It has the characteristics of low RDS(on), ultra-low gate impedance, fully characterized avalanche voltage and current.

The ST180C..C series is IRF's 350A phase control thyristors.

11DQ09/11DQ10 Schottky rectifier is a low power, high frequency diode with very low forward voltage drop and moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection.

This datasheet provides information on absolute maximum ratings for IRFE310, JANTX-, JANTXV-, 2N6786U including continuous drain current, continuous drain current, pulsed drain current, max. power dissipation, linear derating factor, gate-to-source voltage, single pulse avalanche energy, peak diode recovery dv/dt, operating junction temperature, storage temperature range, surface temperature and weight.

IRF5805 is a P-channel MOSFET from International Rectifier that features an ultra-low on-resistance and is ideal for battery and load management applications.

The PVDZ172N Photovoltaic Relay is a single-pole, normally open solid state relay that can replace electro-mechanical relays used for general purpose switching of DC loads. It utilizes International Rectifier’s HEX-FET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. These units overcome the limitations of both electro-mechanical and reed relays by offering the solid-state advantages of high sensitivity, miniaturization, no contact bounce, long operational life, insensitivity to external magnetic fields, shock and vibration, and high reliability inherent with solid state technology. They are ideally suited for switching high currents or low level signals without distortion or injection of electrical noise. These relays are packaged in 8-pin, molded DIP packages and available with through-hole and surface-mount (gull-wing) leads, in plastic shipping tubes.

The ST330S series is a 330 amp phase control thyristor with center amplifying gate, hermetic metal case with ceramic insulator, international standard case TO-209AE (TO-118), threaded studs UNF 3/4-16UNF2A or ISO M24x1.5, compression bonded encapsulation for heavy duty operations such as severe thermal cycling. Typical applications include DC motor controls, controlled DC power supplies and AC controllers.

This document describes the features and characteristics of the ST083S series inverter grade thyristors, including features like center amplifying gate, high surge current capability, low thermal impedance, and high speed performance. It is suitable for inverters, choppers, induction heating, and all types of force-commutated converters. It has a rated current of 85A and a maximum voltage of 400 to 1200V.

The document introduces the fifth generation HEXFETs product from International Rectifier, which features logic-level gate drive, ultra-low on-resistance, and fast switching speed, making it suitable for a wide variety of applications. The product is available in surface mount and through-hole mounting packages, with power dissipation levels up to 1.5 watts in typical surface mount applications. The document also provides the parameters and performance indicators of the product.