CPL-WB-00D3 is a wide band directional coupler designed to measure RF antenna output power in GSM / WCDMA / TD-SCDMA applications. This CPL has been customized for wide band operating frequencies (EGSM and CELL, PCS, DCS, TD-SCDMA, WCDMA Band I) with less than 0.2 dB insertion losses in the transmit bandwidth (824 MHz to 2170 MHz). The CPL-WB-00D3 has been designed using STMicroelectronics IPD (integrated passive device) technology on non conductive glass substrate to optimize RF performance. The device is delivered 100% tested in tape and reel.
This datasheet introduces the EMIF06-MSD04F3 6-line low capacitance IPAD™ for micro-SD card with EMI filtering and ESD protection 's features and characteristics
The EMIF06-MSD03F3 is a 6-line low capacitance IPAD™ for micro-SD card with EMI filtering and ESD protection. It features low power consumption, easy layout, very low PCB space consumption, high reliability offered by monolithic integration, and reduction of parasitic elements thanks to CSP integration.
CPL-WB-01D3 is a wide-band directional coupler designed by STMicroelectronics. It has a wide operating frequency range (824MHz to 2170MHz), low insertion loss (<0.2dB), 26dB coupling factor and a DC resistance of 50 ohms. It has a high ESD robustness (IEC 61000-4-2 Level 4).
The ECMF06-6AM16 is a highly integrated common mode filter designed to suppress EMI/RFI common mode noise on high speed differential serial buses like MIPI D-PHY or MDDI. The ECMF06-6AM16 can protect and filter 3 differential lanes.
The DIP1524-01D3 is a diplexer designed to separate the RF received signals of the GPS-GLONASS from the RF received signals in the 2.4 to 2.7 GHz band.
DIP2450-01D3 2G / 5G WLAN diplexer is a dual band 2.4GHz and 5GHz diplexer with features of low insertion loss, high attenuation levels, high rejection of out-of-band frequencies, small footprint.
This document describes a product called EMIF02-SPK03F2, which is a 2-channel EMI filter and ESD protection device for speaker phones. It features high efficiency in EMI filtering and ESD suppression, low PCB space consumption, thin package, high reliability, and integration. The product complies with IEC 61000-4-2 level 4 standard.
The CPL-WB-02D3 is a wide-band directional coupler designed to measure RF antenna output power. This CPL has been customized for wide band operating frequencies (2G/5G WLAN) with low insertion losses in the transmit bandwidth (2400 MHz to 5850 MHz). The CPL-WB-02D3 has been designed using STMicroelectronics IPD (integrated passive device) technology on non-conductive glass substrate to optimize RF performance. The device is delivered 100% tested in tape and reel.
This datasheet introduces the features and characteristics of STMicroelectronics DCPL-WB-02D3, including 50 Ω nominal input / output impedance, wide operating frequency range, low insertion loss, high ESD ruggedness, lead-free CSP, small footprint, and very low profile
CPL-WB-01C2 is a wide band directional coupler produced by ST. The device has a 50 ohm input/output impedance, a working frequency range of 824-2025 MHz, an insertion loss of less than 0.2 dB, a coupling coefficient of 34 dB, a DC pass loss of 25 dB, an ESD resistance level of 4, and a flip-chip package. The device is small and has a thickness of only 690 microns.
The EMIF01-TV02F3 chip is a highly integrated device designed to suppress EMI and RFI noise in all systems with a TV analog output signal subjected to electromagnetic interferences. This filter includes ESD protection circuitry, which prevents damage to the protected device when subjected to ESD surges up 15 kV. The EMIF01-TV02F3 provides high anti-aliasing filtering performances to reject frequencies above 8 MHz, with high attenuation at 27 MHz when an external inductor of 2.2 µH is connected between pins B2 and B1.
The EMIF07-LCD03F3 is a 7-line highly integrated L/C filter designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interference. The EMIF07-LCD03F3's Flip-Chip packaging means the package size is equal to the die size. This LC filter includes ESD protection circuitry.
EMIF02-MIC06F3 is a highly integrated device designed to suppress EMI/RFI noise for dual microphone line filtering. The EMIF02-MIC06F3 Flip-Chip packaging means the package size is equal to the die size. That's why EMIF02-MIC06F3 is a very small device. Additionally, this filter includes an ESD protection circuitry which prevents damage to the application when subjected to ESD surges up to 15 kV.
