STMicroelectronics manuals, page 187
ST VND7N04 VND7N04-1 VNK7N04FM handbook
This document describes the features and characteristics of the VND7N04, VND7N04-1, and VNK7N04FM 'OMNIFET' fully autoprotected power MOSFETs, released in March 2009 Rev 1 1/17 17. These MOSFETs are made using STMicroeletronics VIPower M0 Technology and are intended to replace standard power MOSFETs in DC to 50 KHz applications. They feature linear current limitation, thermal shutdown, short circuit protection, integrated clamp, low current drawn from input pin, diagnostic feedback, ESD protection, and direct access to the gate of the power MOSFET for analog driving.
ST L9386 handbook
The document introduces the L9386, a dual intelligent power low side switch. It features multipower BCD technology, dual power low side driver with 2 x 5 A, low RDSON, internal output clamping diodes, limited output voltage slew rate for low EMI, µP compatible enable and input, wide operating supply voltage range, real-time diagnostic functions, and device protection functions. It is designed for automotive applications.
ST VND10N06 VND10N06-1 handbook
VND10N06 / VND10N06-1 fully autoprotected Power MOSFET is a MOSFET produced by STMicroelectronics company, which has the characteristics of linear current limitation, thermal shutdown, short circuit protection, integrated clamp, low current input pin, logic level input threshold, ESD protection, Schmitt trigger at input and high noise immunity.
ST VNP7N04 handbook
The VNP7N04 is a monolithic device made using STMicroelectronics VIPower M0 Technology, intended for replacement of standard power MOSFETS in DC to 50 KHz applications. Built-in thermal shut-down, linear current limi- tation and overvoltage clamp protect the chip in harsh enviroments. Fault feedback can be detected by monitoring the voltage at the input pin.
ST VNP5N07 handbook
VNP5N07 OMNIFET is a fully autoprotected power MOSFET. It features: linear current limitation, thermal shutdown, short circuit protection, integrated clamp, low input current, diagnostic feedback, ESD protection, direct access to the power MOSFET gate (analog driving), compatibility with standard power MOSFETs and standard TO-220 package.
ST VNP49N04 handbook
VNP49N04 is a fully autoprotected power MOSFET using STMicroelectronics VIPower technology, intended for replacement of standard power MOSFET in DC to 50 KHz applications. Built-in thermal shut-down, linear current limita- tion and overvoltage clamp protect the chip in harsh enviroments. Fault feedback can be detected by monitoring the voltage at the input pin.
ST VNP28N04 handbook
VNP28N04 is a fully autoprotected power MOSFET with features such as linear current limitation, thermal shutdown, short circuit protection, and integrated clamp.
ST VNP20N07 handbook
VNP20N07 is a fully autoprotected power MOSFET with features such as linear current limitation, thermal shutdown, short circuit protection, integrated clamp, etc. It is intended for replacement of standard power MOSFETs in DC to 50 KHz applications.
ST VNP10N07 handbook
VNP10N07 is a monolithic device made using STMicroelectronics VIPower Technology, intended for replacement of standard power MOSFETS in DC to 50 KHz applications. Built-in thermal shut-down, linear current limi- tation and overvoltage clamp protect the chip in harsh enviroments. Fault feedback can be detected by monitoring the voltage at the input pin.
ST VNP10N06 handbook
The VNP10N06 is a fully protected power MOSFET with a maximum voltage of 60V, a conduction resistance of 0.3 ohms, and a maximum current of 10A. It has the features of linear current limitation, thermal shutdown, short circuit protection, integrated clamp, low input current consumption, logic level input threshold, ESD protection, Schmitt trigger input, high noise immunity, standard TO-220 package, etc.
ST TDA7374 handbook
TDA7374 is a class AB audio dual bridge power amplifier from STMicroelectronics. It features fully complementary PNP/NPN output configuration and no bootstrap capacitors.
ST TDA7396 handbook
The TDA7396 is a BRIDGE class AB audio power amplifier especially intended for car radio High Power applications. The 2Ω power capability together with the possi- bility to operate either in DIFFERENTIAL INPUT MODE or SINGLE ENDED INPUT MODE makes it suitable for boosters and high end car radios.
ST TDA7393 handbook
ST TDA7391 handbook
The TDA7391 is a bridge class AB audio power amplifier specially intended for car radio High Power applications. The high power capability together with the possibility to operate either in DIFFERENTIAL INPUT MODE or SINGLE ENDED INPUT MODE makes it suitable for boosters and high end car radio equipments. The exclusive fully complementary output stage and the internal fixed gain configuration drop the external component count. The on board clipping detector allows easy implementation of gain compression systems.
ST TDA7376B handbook
The TDA7376B is a new technology dual bridge Audio Amplifier designed for car radio applications. It has high output power capability with a maximum output power of 2 x 40W/4Ω. The amplifier features differential inputs, providing high noise immunity and making it suitable for both car radio and car boosters applications. It also includes mute and standby control functions, as well as a programmable distortion detector.