Intersil manuals, page 26
INTERSIL 82C55A Guide1
This file is an introduction to Intersil 82C55A CMOS Programmable Peripheral Interface, which is a high-performance CMOS version of the industry standard 8255A, manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV), is a general-purpose programmable I / O device that can be used with many different microprocessors.
INTERSIL ICM7243 handbook
ICM7243 8-Character, Microprocessor-Compatible, LED Display Decoder Driver
INTERSIL ISL88021 ISL88022 handbook
INTERSIL - EL4511 handbook
The EL4511 super sync separator IC is designed for operation in the next generation of DTV, HDTV, and projector applications, as well as broadcast equipment and other applications where video signals need to be processed. The EL4511 accepts sync on green, separate sync, and H/V sync inputs, automatically selecting the relevant format. It is also capable of detecting and decoding tri-level syncs used with the latest HD systems. Unlike standard sync separators, the EL4511 can automatically detect the line rate and locks to it, without the use of an external RSET resistor. The EL4511 is available in a 24-pin QSOP package and operates over the full 0°C to 70°C temperature range.
INTERSIL HIP4020 datasheet
The HIP4020 is a half amp full bridge power driver for small 3V, 5V, and 12V DC motors. It utilizes an H-Configuration to cross-switch the drive voltage and change the direction of current flow in the load, enabling 4-quadrant load control.
INTERSIL -EL5225 10-Channel TFT-LCD Reference Voltage Generator handbook
The EL5225 is a 10-channel TFT-LCD reference voltage generator from Intersil that can operate over the full -40°C to +85°C temperature range. The device has 10 outputs with a resolution of 10 bits and is programmed using a 3-wire SPI compatible interface. The EL5225 can be stacked to meet applications requiring more than 10 outputs. The reference inputs can be tied to the rails, enabling each part to output the full voltage range, or alternatively, they can be connected to external resistors to split the output range and enable finer resolutions of the outputs.
intersil HS-26C31RH Manual
Intersil HS-26C31RH is a quad differential line driver designed for digital data transmission over balanced lines and meets the requirements of EIA standard RS-422. Radiation hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments. The HS-26C31RH accepts CMOS signal levels and converts them to RS-422 compatible outputs. This circuit uses special outputs that enable the drivers to power down without loading down the bus. Enable and disable pins allow several devices to be connected to the same data source and addressed independently.
intersil X5328 X5329 (Replaces X25328 X25329) Data Sheet
intersil X4163 X4165 16K 2K x 8 Bit handbook
X4163, X4165 16K, 2K x 8 Bit CPU Supervisor with 16K EEPROM is a low-power CPU monitor produced by Intersil. It has optional watchdog timer, low voltage detection and reset assertion.
intersil FSYA450D FSYA450R handbook
This document introduces the Radiation Hardened MOSFET series developed by Intersil, specifically designed for commercial and military space applications. These products have enhanced immunity to Single Event Effects (SEE), particularly Single Event Gate Rupture (SEGR), combined with 100K RADS of total dose hardness, making them ideal for harsh space environments. The MOSFET series includes N-Channel and P-Channel devices with a variety of voltage, current, and on-resistance ratings. Numerous packaging options are available. This MOSFET is an enhancement-mode silicon-gate power field-effect transistor of the vertical DMOS (VDMOS) structure. It is specially designed and processed to be radiation tolerant. The MOSFET is well suited for applications exposed to radiation environments such as switching regulation, switching converters, motor drives, relay drivers, and drivers for high-power bipolar switching transistors requiring high speed and low gate drive power. It can be operated directly from integrated circuits. Reliability screening is available as either commercial, TXV equivalent of MIL-S-19500, or Space equivalent of MIL-S-19500. Contact Intersil for any desired deviations from the data she
intersil ISL84516 ISL84517 handbook
The ISL84516 and ISL84517 are precision analog switches designed for ±1.5V to ±6V supplies. They are suitable for battery powered equipment due to their low power consumption, low leakage currents, and fast switching speeds. Excellent RON flatness maintains signal fidelity over the whole input range, while micro packaging alleviates board space limitations.
intersil HIN230 thru HIN241 handbook
The HIN230-HIN241 family of RS-232 transmitters/receivers interface circuits meet all ElA RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available. They require a single +5V power supply (except HIN231 and HIN239) and feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The HIN233 and HIN235 require no external capacitors and are ideally suited for applications where circuit board space is critical. The family of devices offer a wide variety of RS-232 transmitter/receiver combinations to accommodate various applications (see Selection Table).
INTERSIL - EL4581 handbook
The EL4581 is a device designed to extract timing information from standard negative video sync signals found in NTSC, PAL, and SECAM broadcast systems, as well as non-standard formats and computer graphics systems at higher scan rates. It provides a reliable method of determining the correct sync slide level by setting it to the mid-point between the sync tip and blanking level at the back porch. The device has noise rejection capabilities and compensates for input signal variations.
intersil ISL84516 ISL84517 datasheet
ISL84516 and ISL84517 are Intersil-designed low-voltage, dual-supply, SPST, analog switches that operate from ±1.5V to ±6V.
intersil ISL5861 Data Sheet
ISL5861 is a 12-bit, 130/210+MSPS CMOS, high speed, low power D/A (digital to analog) converter, designed specifically for use in high performance communication systems such as base transceiver stations utilizing 2.5G or 3G cellular protocols.