Intersil manuals, page 21
intersil SPP20N65C3 SPA20N65C3 SPI20N65C3 handbook
The 20N65C3 is a 650V, 20.7A new revolutionary high voltage MOS power transistor. It features ultra low gate charge, periodic avalanche rated, extreme dv/dt rated, high peak current capability and improved transconductance.
INTERSIL HFA1135 Manual
HFA1135 is a high performance, low power video operational amplifier from Intersil, with a bandwidth of 360MHz and a slew rate of 1200V/µs. It features user programmable output limiting to protect downstream devices from damage or input saturation.
intersil HFA1130 handbook
The HFA1130 is a high speed wideband current feedback amplifier featuring programmable output limits. Built with Intersil’s proprietary complementary bipolar UHF-1 process, it is the fastest monolithic amplifier available from any semiconductor manufacturer. This amplifier is the ideal choice for high frequency applications requiring output limiting, especially those needing ultra fast overdrive recovery times. The output limiting function allows the designer to set the maximum positive and negative output levels, thereby protecting later stages from damage or input saturation. The sub-nanosecond overdrive recovery time quickly returns the amplifier to linear operation, following an overdrive condition. The HFA1130 offers significant performance improvements over the CLC500/501/502.
INTERSIL -HIP6601B HIP6603B HIP6604B handbook
The HIP6601B, HIP6603B and HIP6604B are high-frequency, dual MOSFET drivers specifically designed to drive two power N-Channel MOSFETs in a synchronous rectified buck converter topology. These drivers combined with a HIP63xx or the ISL65xx series of Multi-Phase Buck PWM controllers and MOSFETs form a complete core-voltage regulator solution for advanced microprocessors. The HIP6601B drives the lower gate in a synchronous rectifier to 12V, while the upper gate can be independently driven over a range from 5V to 12V. The HIP6603B drives both upper and lower gates over a range of 5V to 12V. This drive-voltage flexibility provides the advantage of optimizing applications involving trade-offs between switching losses and conduction losses. The HIP6604B can be configured as either a HIP6601B or a HIP6603B. The output drivers in the HIP6601B, HIP6603B and HIP6604B have the capacity to efficiently switch power MOSFETs at frequencies up to 2MHz. Each driver is capable of driving a 3000pF load with a 30ns propagation delay and 50ns transition time. These drivers have extremely low EMI and have been qualified to AEC-Q100.
INTERSIL -ISL6605 handbook
The ISL6605 is a high-frequency MOSFET driver optimized to drive two N-Channel power MOSFETs in a synchronous-rectified buck converter topology.
intersil X98021 handbook
intersil x98021 is a video digitizer chip produced by intersil company. it can convert analog rgb or yuv graphic signals from personal computers, workstations and video set-top boxes into digital signals, supporting uxga resolution at 75hz refresh rate. it has high psrr and dynamic performance.
intersil X5083 Manual
X5083 CPU Supervisor with 8Kbit SPI EEPROM is a chip that integrates four popular functions (Power-on Reset Control, Watchdog Timer, Supply Voltage Supervision, Block Lock Serial EEPROM Memory) in one package. This combination lowers system cost, reduces board space requirements, and increases reliability.
intersil EL9200 EL9201 EL9202 handbook
The EL9200, EL9201, and EL9202 are programmable VCOM amplifiers for use in TFT-LCD displays. Featuring 1, 2, and 4 channels of VCOM amplification, respectively, each device features just a single programmable current source for adding offset to one VCOM output. This current source is programmable using a single wire interface to one of 128 levels. The value is stored on an internal EEPROM memory. The EL9200 is available in the 12-pin DFN package and the EL9201 and EL9202 are available in 24-pin QFN packages. All are specified for operation over the -40°C to +85°C temperature range.
intersil EL5156 EL5157 EL5256 EL5257 handbook
The EL5156, EL5157, EL5256, and EL5257 are 600MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of <0.01%, 1mV offsets and 40kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement instrumentation to high speed video and monitor applications demanding the very highest linearity at very high frequency.
intersil EL5176 Manual
The EL5176 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving twisted-pair lines or any application where common mode injection is likely to occur. The input signal can be in either single-ended or differential form but the output is always in differential form. On the EL5176, two feedback inputs provide the user with the ability to set the device gain (stable at minimum gain of one). The output common mode level is set by the reference pin (REF), which has a -3dB bandwidth of over 50MHz. Generally, this pin is grounded but it can be tied to any voltage reference. Both outputs (OUT+, OUT-) are short circuit protected to withstand temporary overload condition. The EL5176 is available in the 10-pin MSOP package and is specified for operation over the full -40°C to +85°C temperature range. See also EL5171 (EL5176 in 8-pin MSOP.)
intersil EL5172 EL5372 Manual
The EL5172 and EL5372 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments. They are primarily targeted for applications such as receiving signals from twisted-pair lines or any application where common mode noise injection is likely to occur. The EL5172 and EL5372 are stable for a gain of one and requires two external resistors to set the voltage gain. The output common mode level is set by the reference pin (VREF), which has a -3dB bandwidth of over 120MHz. Generally, this pin is grounded but it can be tied to any voltage reference. The output can deliver a maximum of ±60mA and is short circuit protected to withstand a temporary overload condition. The EL5172 is available in the 8-pin SO and 8-pin MSOP packages and the EL5372 in a 24-pin QSOP package. Both are specified for operation over the full -40°C to +85°C temperature range.
INTERSIL EL4332 Manual(1)
The EL4332 is a triple 2:1 300MHz Mux-Amp AV = 2 that is designed for component video multiplexing and is especially suited for pixel switching. It has 3ns A-B switching time and 650V/µs slew rate, and can drive back terminated cables.
intersil ISL8483 ISL8485 ISL8488 ISL8489 ISL8490 ISL8491 handbook
Intersil RS-485/RS-422 devices are BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. The devices feature slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications. Data rates up to 5Mbps are achievable by using the ISL8485, ISL8490, or ISL8491, which feature higher slew rates. All devices present a 'single unit load' to the RS-485 bus, which allows up to 32 transceivers on the network. Receiver (Rx) inputs feature a 'fail-safe if open' design, which ensures a logic high Rx output if Rx inputs are floating. Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive.
intersil ISL84782 handbook
The ISL84782 low-voltage single supply differential 4:1 analog switch has a low ON resistance, low leakage current and high voltage tolerance. It has precision, bidirectional analog switches configured as a differential 4-channel multiplexer/demultiplexer. It is designed to operate from a single +1.6V to +3.6V supply. The device has an inhibit pin to simultaneously open all signal paths.
intersil ISL84762 handbook
ISL84762 is a low ON-resistance, low voltage, bidirectional, dual single-pole/double-throw (SPDT) analog switch designed to operate from a single +1.65V to +3.6V supply.