Intersil manuals, page 20
intersil ISL6609 ISL6609A Data Sheet
ISL6609, ISL6609A Synchronous Rectified MOSFET Driver is a high frequency, MOSFET driver optimized to drive two N-Channel power MOSFETs in a synchronous-rectified buck converter topology. This driver combined with an Intersil ISL63xx or ISL65xx multiphase PWM controller forms a complete single-stage core-voltage regulator solution with high efficiency performance at high switching frequency for advanced microprocessors. The IC is biased by a single low voltage supply (5V), minimizing driver switching losses in high MOSFET gate capacitance and high switching frequency applications. Each driver is capable of driving a 3nF load with less than 10ns rise/fall time. Bootstrapping of the upper gate driver is implemented via an internal low forward drop diode, reducing implementation cost, complexity, and allowing the use of higher performance, cost effective N-Channel MOSFETs. Adaptive shoot-through protection is integrated to prevent both MOSFETs from conducting simultaneously. The ISL6609, ISL6609A features 4A typical sink current for the lower gate driver, enhancing the lower MOSFET gate hold-down capability during PHASE node rising edge, preventing power loss caused by the self turn-on of the lower MOSFET due to the high dV/dt of the switching node. The ISL6609, ISL6609A also features an input that recognizes a high-impedance state, working together with Intersil multiphase PWM controllers to prevent negative transients on the controlled output.
intersil ISL6226 Data Sheet
ISL6226 is an advanced PWM and linear power controller for portable applications from Intersil (Onsemi). ISL6226 integrates a fixed, selectable frequency pulse-width-modulation (PWM) controller and a 3A LDO linear regulator controller with monitoring and protection circuitry in a single 24 lead SSOP. The PWM controller regulates the battery input voltage to a user selected output voltage. Light load synchronous converter and hysteretic operation contribute to a high efficiency over a wide range of input voltage and load variation. Efficiency can be further enhanced by using the lower MOSFET’s rDS(ON) as the current sense element. Input voltage feed-forward ramp modulation, current-mode control, and internal feed-back compensation provide fast and stable handling of input voltage load transients encountered in advanced portable computer chip sets. The internal linear regulator controller provides a user selected high current output from an unregulated input with user selected current limit.
intersil ISL59444 Data Sheet
The ISL59444 is a single-output 4:1 MUX-amp with a fixed gain of 1 and a 1GHz bandwidth. It is ideal for professional video switching, HDTV, computer display routing, and other high-performance applications. The device contains logic inputs for channel selection (S0, S1), latch control signals (LE1, LE2), and a three-state output control (HIZ) for individual selection of MUX amps that share a common video output line. All logic inputs have pull-downs to ground and may be left floating.
intersil ISL1209 Data Sheet
The ISL1209 is a low-power real-time clock (RTC) from Intersil that features event detection, timing and crystal compensation, clock/calendar, power fail indicator, periodic or polled alarm, intelligent battery backup switching and battery-backed user SRAM.
intersil ICL3221E ICL3222E ICL3223E ICL3232E ICL3241E ICL3243E Data Sheet
ICL32XXE devices are 3.0V to 5.5V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V.
intersil HIN231 HIN232 HIN236 HIN237 HIN238 HIN239 HIN240 HIN241 handbook
HIN231, HIN232, HIN236, HIN237, HIN238, HIN239, HIN240, HIN241 are a family of +5V powered RS-232 transmitters/receivers. They meet all EIA RS-232E and V.28 specifications and are particularly suited for applications where ±12V is not available. These devices require only a single +5V power supply and feature onboard charge pump voltage converters that generate +10V and -10V supplies from the 5V supply. The family of devices offer a wide variety of RS-232 transmitter/receiver combinations to accommodate various applications.
intersil FSF150D FSF150R Data Sheet
The document introduces a series of radiation-hardened MOSFET products developed by Intersil Corporation for commercial and military space applications. These products have enhanced immunity to Single Event Effects (SEE), particularly Single Event Gate Rupture (SEGR), and can withstand a total dose hardness of 100K RADS, making them ideal for harsh space environments. The dose rate and neutron tolerance required for military applications are also met. The SEGR resistant radiation-hardened MOSFET portfolio from Intersil includes N-Channel and P-Channel devices.
intersil 82C54 Data Sheet
The Intersil 82C54 is a high performance CMOS Programmable Interval Timer manufactured using an advanced 2 micron CMOS process.
intersil X9408 Data Sheet
The X9408 is a low noise, low power, 2-wire bus quad digitally controlled potentiometer with 40 ohm typical resistance, four non-volatile data registers, 2.7V to 5.5V operation, 10k ohm, 2.5k ohm end to end resistances, 100,000 data changes per bit per register, 100 years data retention, and three packages: 24 pin SOIC, TSSOP, and PDIP.
intersil X9317 Data Sheet
This document is the PDF datasheet for Intersil X9317, which introduces the features and characteristics of the product.
intersil X9428 Low Noise/Low Power/2-Wire Bus handbook
This document describes the features of the X9428 low noise/low power/2-wire bus single digitally controlled potentiometer (XDCP). The product features a solid state potentiometer, 2-wire serial interface, register oriented format, and is ideal for low power applications.
intersil HCTS193MS Radiation Hardened Synchronous 4-Bit Up/Down Counter handbook
The document provides ordering information and features of the products HCTS193DMSR and HCTS193KMSR from Intersil Corporation in 1999. These devices are sensitive to electrostatic discharge and require proper IC handling procedures. They utilize 3 micron radiation hardened CMOS SOS technology, with a total dose of 200K RAD (Si) and low single event upset (SEU) immunity. The products have a temperature range of -55°C to +125°C and offer significant power reduction compared to LSTTL ICs.
intersil BAR14-1 BAR15-1 BAR16-1 BAR61... handbook
This document describes a silicon PIN diode (BAR14-1, BAR15-1, BAR16-1, BAR61) that can be used as an RF switch and RF attenuator for frequencies above 10 MHz. The diode has a low distortion factor and long-term stability of electrical characteristics.
intersil EL7564 handbook
EL7564 is a monolithic, full-featured synchronous step-down regulator with output voltage adjustable from 1.0V to 3.8V. It is capable of delivering 4A continuous current at up to 95% efficiency. The EL7564 operates at a constant frequency pulse width modulation (PWM) mode, making external synchronization possible. Patented on-chip resistorless current sensing enables current mode control, which provides cycle-by-cycle current limiting, over-current protection, and excellent step load response. The EL7564 features power tracking, which makes the start-up sequencing of multiple converters possible. A junction temperature indicator conveniently monitors the silicon die temperature, saving the designer time on the tedious thermal characterization. The minimal external components and full functionality make this EL7564 ideal for desktop and portable applications. The EL7564 is specified for operation over the -40°C to +85°C temperature range.
intersil RFG40N10 RFP40N10 RF1S40N10SM handbook
Intersil 40A, 100V, 0.040 Ohm, N-Channel Power MOSFETs