Alliance Manuals

This manual provides instructions for operating, programming, and maintaining Alliance Laundry Systems LLC’s 50-pound and 75-pound capacity dryers. The manual includes instructions for installing, using, and maintaining the dryer.

This document is a dryer user manual, guiding users how to operate and maintain the dryer.

This document is about the installation manual of Pocket Hardmount Variable-Speed PS40 Control

This document describes the features and characteristics of Alliance Semiconductor's AS7C4098 and AS7C34098 5V/3.3V 256K × 16 CMOS SRAM products, including temperature range, organization, power consumption, data retention, memory expansion, and interface compatibility.

AS7C4096 AS7C34096 5V/3.3V 512K × 8 CMOS SRAM is an industrial and commercial temperature range memory with features such as 524,288 words × 8 bits, center power and ground pins, high speed and low power consumption.

The AS91L1006BU is a product of Achronix, and its model is AS91L1006BU. It is a 6-port JTAG gateway that can extend the IEEE1149.1 standard. It allows the IEEE1149.1 interface to be used in a true multi-drop environment without any additional signals.

The document provides information about the features and characteristics of Alliance Semiconductor P28xx series low-power EMI reduction integrated circuits. These ICs utilize an FCC approved method of EMI attenuation and can provide up to 15 dB of EMI reduction. They generate 1X, 2X, and 4X low EMI spread spectrum clocks based on the input frequency. The P28xx series is optimized for input frequencies ranging from 10 to 40 MHz and includes an internal loop filter to minimize external components and board space. It supports selectable spread options including Down Spread and Center Spread, with low inherent cycle-to-cycle jitter. The ICs operate at 3.3V and are CMOS/TTL compatible. They have a pinout compatible with Cypress CY25811, CY25812, and CY25814. The P28xx series is available for industrial temperature range and comes in 8-pin SOIC and TSSOP packages.

The AS91L1006BU is a one-to-6-port JTAG gateway. It partitions a single JTAG chain into six separate chains. These separate chains can be optionally configured to operate as a single chain. The AS91L1006BU device is used to provide enhanced capabilities to the standard IEEE1149.1. It enables the IEEE1149.1 interface to be used in a true Multi-Drop environment without any additional signals. This Multi-Drop capability enables the standard IEEE1149.1 interface to be used not just for stand-alone PCB (Printed Circuit Board) testing, but also for complete system testing including all PCBs within a system back plane environment. The AS91L1006BU provides the capability of partitioning the PCB into multiple smaller IEEE1149.1 scan chains totally under software control. Partitioning the IEEE1149.1 chains on the PCB has several benefits including easier fault diagnostics capabilities as a fault on one of the IEEE1149.1 Local Scan Ports (LSPs) does not render the PCB untestable, faster flash programming on the PCBs, and removal of IEEE1149.1 signal loading issues. All of the protocols required for addressing the AS91L1006BU device via the Multi-Drop capability and the protocols for configuring which of the six IEEE1149.1 LSPs on the AS91L1006BU are to be used, is handled via 3rd party ATPG tools from vendors like Asset-Intertech and JTAG Technologies. In a Multi-Drop environment it is also possible to perform interconnect test

AS7C33128FT18B is a 3.3V 128K × 18 Flow Through Synchronous SRAM produced by Alliance Semiconductor. It has the following features: 131,072 words × 18 bits, Fast clock to data access: 6.5/7.5/8.0/10.0 ns, Fast OE access time: 3.5/4.0 ns, Fully synchronous flow through operation, Asynchronous output enable control, Economical 100-pin TQFP package, Individual byte write and Global write, Multiple chip enables for easy expansion, 3.3V core power supply, 2.5V or 3.3V I/O operation with separate VDDQ, Linear or interleaved burst control, Snooze mode for reduced power standby, Common data inputs and data outputs.

AS7C513/AS7C3513 are 5V/3.3V 32K×16 CMOS SRAMs with high speed, low power consumption, 2.0V data retention, TTL compatible, three-state I/O, etc.

This document describes the features and characteristics of Alliance Semiconductor Production's P1818/19/20/21/22 Low Power Mobile VGA EMI Reduction IC.

P2781/82/84 is a versatile spread spectrum frequency modulator designed specifically for digital camera and other digital video and imaging applications. The P278xA reduces electromagnetic interference (EMI) at the clock source, which provides system wide reduction of EMI of all clock dependent signals.

The ASM5I9658 is a 3.3V compatible, 1:10 PLL based clock generator and zero-delay buffer targeted for high performance low-skew clock distribution in mid-range to high-performance telecom, networking and computing applications. With output frequencies up to 250MHz and output skews less than 120pS, the device meets the needs of the most demanding clock applications.

This document describes the features and characteristics of Alliance Semiconductor's AS7C33256NTF32A and AS7C33256NTF36A products, including organization, fast clock to data access, asynchronous output enable control, multiple chip enables, and various operating modes.