TEXAS Manuals

SN54AHC86, SN74AHC86 are quadruple 2-input exclusive-OR gates introduced by Texas Instruments. These devices operate in a range of 2-V to 5.5-V VCC, can withstand 250 mA current, and exceed JESD 22 ESD protection performance standards. These standards include 2000-V Human-Body Model (A114-A), 200-V Machine Model (A115-A), and 1000-V Charged-Device Model (C101).

This document is the SCHS122I datasheet, which introduces the features and characteristics of the product, including wide voltage range, low on resistance, low crosstalk, fast switching speed and propagation speed, break-before-make switching, wide operating temperature range, high noise immunity, etc.

TRS3237E is a multi-channel RS-232 1-MBit/s line driver/receiver from TI. It meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards, and has ESD protection, low power consumption and flexible interfaces

SN74HC367N/D/DT/NSR/PW/PWR/PWT/J/W/FK is a 3-state output, high current driving capacity, low power buffer and line driver produced by Texas Instruments. Its operating voltage range is 2V~6V, the output current can reach ±6mA, and it can drive buses, buffer memory address registers, and drive 15 LSTTL loads.

The TPIC5223L is a monolithic gate-protected logic-level power DMOS array that consists of two electrically isolated independent N-channel enhancement-mode DMOS transistors.

The MSP430x31x is an ultralow-power mixed signal microcontroller family consisting of several devices that feature different sets of modules targeted to various applications.

The CD4073B, CD4081B, and CD4082B types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), and 14-lead thin shrink small-outline packages (PW and PWR suffixes).

This document describes the features and characteristics of TI's new generation BiMOS general-purpose operational amplifier family, TLC07x.

The ADS1240 and ADS1241 are precision, wide dynamic range, delta-sigma, Analog-to-Digital (A/D) converters with 24-bit resolution operating from 2.7V to 5.25V power supplies. The delta-sigma A/D converter provides up to 24 bits of no missing code performance and effective resolution of 21 bits. The input channels are multiplexed. Internal buffering can be selected to provide very high input impedance for direct connection to transducers or low-level voltage signals. Burnout current sources are provided that allow for detection of an open or shorted sensor. An 8-bit Digital-to-Analog (D/A) converter provides an offset cor- rection with a range of 50% of the Full-Scale Range (FSR). The Programmable Gain Amplifier (PGA) provides selectable gains of 1 to 128, with an effective resolution of 19 bits at a gain of 128. The A/D conversion is accomplished with a 2nd-order delta-sigma modu- lator and programmable Finite-Impulse Response (FIR) filter that provides a simultaneous 50Hz and 60Hz notch.

The TPS23753 is a combined Power over Ethernet (PoE) powered device (PD) interface and current-mode dc/dc controller optimized specifically for isolated converter designs. The PoE implementation supports the IEEE 802.3-2005 (previously 802.3af) standard, 12.95 W (13 W) PD.

The DDC112 is a dual input, wide dynamic range, charge-digitizing analog-to-digital (A/D) converter with 20-bit resolution. Low-level current output devices, such as photosensors, can be directly connected to its inputs. Charge integration is continuous as each input uses two integrators; while one is being digitized, the other is integrating. For each of its two inputs, the DDC112 combines current-to-voltage conversion, continuous integration, programmable full-scale range, A/D conversion, and digital filtering to achieve a precision, wide dynamic range digital result. In addition to the internal programmable full-scale ranges, external integrating capacitors allow an additional user-settable full-scale range of up to 1000pC. To provide single-supply operation, the internal A/D converter utilizes a differential input, with the positive input tied to VREF. When the integration capacitor is reset at the beginning of each integration cycle, the capacitor charges to VREF. This charge is removed.

The ADS8517 is a complete low-power, single 5-V supply, 16-bit sampling analog-to-digital (A/D) converter. It contains a complete, 16-bit, capacitor-based, successive approximation register (SAR) A/D converter with sample-and-hold, clock, reference, and data interface. The converter can be configured for a variety of input ranges including ±10 V, 4 V, and 5 V. For most applications, it can be configured as a low-power, compact analog front end to achieve excellent performance.

The TLV247x is a low power, high performance operational amplifier with a 2.8MHz gain-bandwidth product, low input bias current of 2.5pA, and input offset voltage of 250μV.