TEXAS Manuals

This document introduces the features of UCC28083/4/5/6 and UCC38083/4/5/6, including programmable slope compensation, internal soft-start, cycle-by-cycle current limiting, low start-up current, single external component oscillator, high-current totem-pole dual output stage, current sense discharge transistor, internally trimmed bandgap reference and undervoltage lockout

This document describes the features and characteristics of the UC1524, UC2524, and UC3524 PWM modulators. They can be used to build regulating power supplies, inverters, or switching regulators, and can also be used as control elements for high-power output applications.

TPA0132 is a 2.8W stereo audio power amplifier with DC volume control, compatible with PC 99 desktop line-out, output power can reach 2.8W/channel, internal gain control, eliminating external gain setting resistors.

This data sheet describes the application circuit of TPA6012A4, including the circuit schematic and package. TPA6012A4 is a 3W stereo audio power amplifier with 32-step DC volume control, fade mode and 85dB mute mode. The amplifier supports BTL (speaker) and SE (headphone) volume control.

The UC3849 is a secondary side average current mode controller produced by TI company. It has a 1MHz operation frequency, supports differential AC switching current sensing, accurate programmable maximum duty cycle, multiple chips can be synchronized to the fastest oscillator, wide gain bandwidth product (70MHz, Acl>10) voltage error and current sense amplifiers, and up to 10 devices can easily share a common load.

This document is about TI's TPA721 audio power amplifier, which is a low-voltage audio power amplifier that supports 3.3-V and 5-V power supplies. The output power is 250-mW and the operating frequency is 20 kHz

The UC3879 is a phase-shift resonant controller with programmable output turn-on delay that is compatible with voltage mode or current mode topologies and can operate at switching frequencies up to 300 kHz.

The TAS5342 is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4-ohm bridge-tied load (BTL) at up to 100W per channel with low harmonic distortion, low noise, and low idle current. It has a complete protection system to safeguard the device against a wide range of fault conditions. Supports multiple power output modes.

The TPA6211A1 is a 3.1W mono fully-differential audio power amplifier designed for wireless handsets, PDAs, and notebook computers. It features low power consumption, fast startup, low distortion, and wide voltage range.

This document describes the features and characteristics of UC2842A/3A/4A/5A family of control ICs. This family is suitable for offline and DC to DC converters, and it has features such as low start up current, trimmed oscillator discharge current, automatic feed forward compensation, and pulse-by-pulse current limiting.

The TL284xB and TL384xB series of high-performance current-mode PWM controllers provide low start-up current, precise reference, automatic feed-forward compensation, high-current totem-pole output, undervoltage lockout and double-pulse suppression, and can implement off-line or dc-to-dc fixed-frequency current-mode control schemes with a minimum number of external components.

The TPA3008D2 is a 10-W (per channel) efficient class-D audio amplifier for driving bridged-tied stereo speakers. The TPA3008D2 can drive stereo speakers as low as 8 Ω. The high efficiency of the TPA3008D2 eliminates the need for external heatsinks when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 15.3, 21.2, 27.2, and 31.8 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-out

The TPA3101D2 is a high-efficiency, 10-W stereo Class-D audio power amplifier from TI that can drive 4-ohm speakers. It features 87% efficiency, operates from 10-26V, and has four selectable, fixed gain settings: 20, 26, 32, and 36 dB. The amplifier also has thermal and short-circuit protection, and an auto-recovery feature.

The TPA3100D2 is a 20-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. The TPA3100D2 can drive stereo speakers as low as 4Ω with a high efficiency of 92%, eliminating the need for an external heat sink. The gain of the amplifier is controlled by two gain select pins, with gain selections of 20, 26, 32, and 36 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts. It also features a clock output for synchronization with multiple Class-D devices.

The TPS2041A through TPS2044A and TPS2051A through TPS2054A power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely to be encountered. Each switch is controlled by an independent logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. These devices limit the output current to a safe level when the output load exceeds the current-limit threshold or a short is present.