Fairchild Manuals - Page 161

ManualLib has 3,322 Fairchild manuals, in categories such as Automation control Equipment, Electronic Original. Every file can be read online or downloaded as a PDF for free.

Fairchild manuals, page 161

  • FAIRCHILD 2N3390 2N3391 2N3391A 2N3392 2N3393 Manual

    2N3390 / 2N3391 / 2N3391A / 2N3392 / 2N3393 are NPN General Purpose Amplifiers produced by Fairchild Semiconductor Corporation. This device supports a maximum collector current of 500mA, a maximum collector-emitter voltage of 25V and a maximum collector-base voltage of 25V.

  • FAIRCHILD FGL40N120AND Manual

    This document describes the features and characteristics of the FGL40N120AND 1200V NPT IGBT product from Fairchild Semiconductor Corporation, including high speed switching, low saturation voltage, and high input impedance. The product is suitable for applications such as induction heating, UPS, AC & DC motor controls, and general purpose inverters.

  • FAIRCHILD MPS6515/MMBT6515 handbook

    This document provides the absolute maximum ratings and electrical characteristics of MPS6515/MMBT6515, released by Fairchild Semiconductor Corporation in February 2003. It includes various parameter values such as voltage, current, temperature, etc., as well as the device's off characteristics and on characteristics.

  • FAIRCHILD MPS6514 handbook

    MPS6514 is a power amplifier produced by Fairchild Semiconductor Corporation. This PDF file provides information about the product's absolute maximum ratings, electrical characteristics, thermal characteristics, off characteristics, on characteristics, and small signal characteristics.

  • FAIRCHILD PN/MPS/FTSO3638 PN/MPS/FTSO3638A handbook

  • FAIRCHILD BC807/BC808 Manual

    BC807/BC808 is a PNP epitaxial silicon transistor suitable for AF driver stages and low power output stages. Its features include: collector-emitter voltage ranging from -45V to -25V, emitter-base voltage of -5V, maximum collector current of -800mA, maximum collector power dissipation of 310mW, etc.

  • FAIRCHILD LM741 Single Operational Amplifier handbook

    The LM741 series are general purpose operational amplifiers intended for a wide range of analog applications. They provide high gain, wide operating voltage range, and superior performance in integrator, summing amplifier, and general feedback applications.

  • FAIRCHILD semiconductor LMV321 LMV358 LMV324 General Purpose Low Voltage Rail-to-Rail Output Amplifiers handbook

    The LMV321/358/324 is a low cost, voltage feedback amplifier that consumes only 80µA of supply current per amplifier. The LMV3XX family operates from 2.7V (±1.35V) to 5.5V (±2.75V) supplies. The common mode voltage range extends below the negative rail and the output provides from -0.25V to +2.69V. The series is designed in a CMOS process and provides 1.2MHz of bandwidth and 1.5V/µs of slew rate at a low supply voltage of 2.7V. The combination of low power, rail-to-rail performance, low cost and high performance make the LMV3XX family ideal for a wide range of applications.

  • Fairchild Semiconductor LM224/LM224A, LM324/LM324A, LM2902 Quad Operational Amplifier Datasheet

    Datasheet 12 pages · 138 KB · EN

    This datasheet details the electrical characteristics, thermal data, and mechanical dimensions for the LM224, LM324, and LM2902 quad operational amplifiers.

  • FAIRCHILD MM74C925 MM74C926 MM74C927 MM74C928 4-Digit Counters with Multiplexed 7-Segment Output Drivers datasheet

    The MM74C925, MM74C926, MM74C927, and MM74C928 are 4-digit counters with multiplexed 7-segment output drivers. They are CMOS counters that have an internal output latch, NPN output sourcing drivers for a 7-segment display, and internal multiplexing circuitry. The counters advance on the negative edge of the clock and can be reset to zero using the reset input. The latch enable input allows for latching the numbers in the counters into the internal output latches. The display select input determines which number is displayed. The MM74C925 is a 4-decade counter with latch enable, clock, and reset inputs. The MM74C926 is similar to the MM74C925, but it also has a display select input and a carry-out output for cascading counters. The carry-out signal goes high at 6000 and goes back low at 0000. The MM74C927 is similar to the MM74C926, but the second most significant digit divides by 6 instead of 10.

  • FAIRCHILD MM74C922 MM74C923 16-Key Encoder 20-Key Encoder handbook

    The document describes the features and characteristics of the MM74C922 and MM74C923 CMOS key encoders. They provide all the necessary logic to fully encode an array of SPST switches. These encoders also have on-chip pull-up devices which permit switches with up to 50 kΩ on resistance to be used. No diodes in the switch array are needed to eliminate ghost switches. The internal debounce circuit needs only a single external capacitor and can be defeated by omitting the capacitor. A Data Available output goes to a high level when a valid keyboard entry has been made. The Data Available output returns to a low level when the entered key is released, even if another key is depressed. The Data Available will return high to indicate acceptance of the new key after a normal debounce period; this two-key roll-over is provided between any two switches. An internal register remembers the last key pressed even after the key is released. The 3-STATE outputs provide for easy expansion and bus operation and are LPTTL compatible.

  • FAIRCHILD MM74C911 4-Digit Expandable Segment Display Controller handbook

    The MM74C911 display controller is an interface element with memory that drives a 4-digit, 8-segment LED display. The MM74C911 allows individual control of any segment in the 4-digit display. The number of segments per digit can be expanded without any external components. For example, two MM74C911's can be cascaded to drive a 16-seg- ment alpha-numeric display. The display controllers receive data information through 8 data lines a, b…DP, and digit information through 2 address inputs K1 and K2. The input data is written into the register selected by the address information when CHIP ENABLE, CE, and WRITE ENABLE, WE, are LOW and is latched when either CE or WE return HIGH. Data hold time is not required. A self-contained internal oscillator sequentially presents the stored data to high drive (100 mA typ.) 3-STATE output drivers which directly drive the LED display. The drivers are active when the control pin labeled SEGMENT OUTPUT ENABLE, SOE, is LOW and go into 3-STATE when SOE is HIGH. This feature allows for duty cycle brightness control, or for disabling the output drive for power conservation. The digit outputs directly drive the base of the digit transis- tor when the control pin labeled DIGIT INPUT OUTPUT, DIO, is LOW. When DIO is HIGH, the digit outputs are disabled and the digit inputs are available for external control of the digit segment decoders.

  • FAIRCHILD MM74C906 MM74C907 Hex Open Drain N-Channel Buffers Hex Open Drain P-Channel Buffers handbook

    The MM74C906 and MM74C907 buffers employ monolithic CMOS technology in achieving open drain outputs. The MM74C906 consists of six inverters driving six N-channel devices; and the MM74C907 consists of six inverters driving six P-channel devices. The open drain feature of these buffers makes level shifting or wire AND and wire OR functions by just the addition of pull-up or pull-down resistors. All inputs are protected from static discharge by diode clamps to VCC and to ground.

  • FAIRCHILD MM74C86 Quad 2-Input EXCLUSIVE-OR Gate handbook

    MM74C86 is a quad 2-input exclusive-OR gate produced by Fairchild Semiconductor Corporation. It uses complementary metal oxide semiconductor (CMOS) transistors to achieve a wide power supply operating range, low power consumption, and high noise margin, and provides basic functions for implementing digital integrated circuit systems.

  • FAIRCHILD MM74C221 Dual Monostable Multivibrator handbook

    MM74C221 is a dual monostable multivibrator produced by Fairchild Semiconductor