Key facts
- Manuals
- 13
- Models
- 1
- Languages
- EN
- Last added
- 2023-10-19
Kutai Electronics Industry Co., Ltd. models by category
Featured Kutai Electronics Industry Co., Ltd. manuals
Kutai Electronics ECU-05 Ver1.0 Control Unit User Manual
The ECU-05 Ver1.0 is a control unit that converts manual key-start generators into auto-start systems. It mimics manual key actions using standard two-wire signals from switches. The unit attempts to start the generator up to three times, with programmable intervals. It supports gasoline and gas engines via DIP switch settings. Installation involves connecting to the key switch and monitoring generator output. The unit operates on 12V or 24V DC and includes LEDs for status indication.
Technical specifications include a 12-36V DC input, 30A output for starter and pre-heat, and a 100-240V AC alternator input. It is designed for operation in temperatures from -20°C to +60°C and has dimensions of 162 x 112 x 31 mm.
Covers: Introduction · Features · Installation · Specifications · Electrical Connections · Time Delay Setting and Alarm Indicators
Kutai EA75A220 Generator Automatic Voltage Regulator Operation Manual
This manual provides instructions for installing, adjusting, and troubleshooting the EA75A220 Automatic Voltage Regulator, designed for carbon brush type generators. It covers specifications, wiring connections, frequency selection, field flashing procedures, and troubleshooting common issues. The regulator is available in half-wave and full-wave versions and includes safety warnings for proper installation and operation.
The manual includes detailed adjustment steps for voltage and stability, under frequency protection settings, and field flashing to resolve voltage build-up problems. It also outlines safety precautions and installation guidelines to prevent damage or injury.
Covers: Specification · Adjustment · Wiring Connection · Frequency Selection and Knee Point Adjustment · Field Flashing · Troubleshooting
Kutai EG3002 Electronic Engine Governor Controller User Manual
The EG3002 is an electronic engine governor controller designed to maintain constant engine speed by comparing a magnetic pickup signal with a preset speed. It supports external, built-in, and PT-pump actuators, with settings for Cummins PT-Pump and 'extreme slow response' engines. The unit operates on 10–32 Vdc and features adjustable speed droop, ramp time, and idle speed. It includes DIP switches for frequency range selection and potentiometers for fine-tuning parameters like gain, integral, and derivative settings. Installation requires shielded cables and proper grounding to avoid noise interference. Safety warnings advise against over-speed operation and recommend external over-speed protection.
Wiring and adjustment procedures are detailed, including terminal connections for battery, actuator, MPU, and remote speed control. Initial setup involves selecting the correct frequency range based on engine RPM and flywheel teeth, adjusting idle and run speed, and calibrating gain, integral, and derivative settings for stable operation. Parallel generator operation is supported with adjustable speed droop for load sharing. The manual includes troubleshooting tips for engine start issues and speed instability.
Covers: Summary · Specification · Appearance / Dimensions / Installation Drawing · Potentiometer Adjustments and DIP Switch Functions · Wiring Connections · Adjustment
Kutai EG3002F Electronic Engine Governor Controller User Manual
This manual provides detailed instructions for installing and adjusting the EG3002F electronic engine governor controller. It covers wiring connections, potentiometer adjustments, DIP switch configurations, and troubleshooting for engines with external, built-in, or PT-Pump actuators. The controller supports frequency ranges from 600 to 9500 Hz and includes features like idle speed control, ramp time adjustment, and speed droop for parallel operation.
The manual also explains how to configure the unit for Cummins PT-Pump engines and "extreme slow response" engines, with specific settings for gain, integral, and differential parameters. Safety warnings are included, such as the absence of over-speed protection and the need for a separate over-speed device. Installation must be performed by qualified personnel using shielded cables and proper wire gauges.
Covers: Wiring Connections · Potentiometer Adjustments · DIP Switch Functions · Initial Settings · Trial Run · Idle Speed and Ramp Time Settings
Latest Kutai Electronics Industry Co., Ltd. manuals
Kutai Electronics ECU-05 Ver1.0 Control Unit User Manual
User Manual 4 pages · 470 KB · ENUser manual for Kutai Electronics ECU-05 Ver1.0, an auto-start control unit for generators.
Kutai EA75A220 Generator Automatic Voltage Regulator Operation Manual
User Manual 4 pages · 456 KB · ENOperation manual for Kutai's EA75A220 automatic voltage regulator for carbon brush generators.
Kutai EG3002 Electronic Engine Governor Controller User Manual
User Manual 8 pages · 3.3 MB · ENUser manual for Kutai's EG3002 electronic engine governor controller, covering setup, wiring, and adjustment for various engine types.
Kutai EG3002F Electronic Engine Governor Controller User Manual
User Manual 8 pages · 3.5 MB · ENUser manual for Kutai's EG3002F electronic engine governor controller, covering setup, wiring, and adjustment for various engine types.
Kutai ADVR-054 Universal Hybrid Analog-Digital Voltage Regulator Operation Manual
User Manual 5 pages · 529 KB · ENUser manual for Kutai's ADVR-054 voltage regulator, covering installation, dip switch settings, and connection diagrams for shunt and auxiliary windings…
Kutai EPMG-1270 & EPMG-2470 Generator Excitation Booster System User Manual
User Manual 6 pages · 429 KB · ENUser manual for Kutai's EPMG-1270 and EPMG-2470 excitation booster systems for brushless generators.
Kutai EG2000 Electronic Governor Controller Operation Manual
User Manual 7 pages · 332 KB · ENOperation manual for Kutai's EG2000 electronic governor controller, covering installation, connection, and adjustment for engine speed control.
Kutai EA200A Generator Automatic Voltage Regulator Operation Manual
User Manual 20 pages · 3.1 MB · ENOperation manual for Kutai's 200A automatic voltage regulator compatible with self-excited carbon brush generators.
Kutai ADVR-07FH Digital Voltage Regulator Operation Manual
User Manual 4 pages · 527 KB · ENOperation manual for Kutai's ADVR-07FH universal hybrid analog-digital voltage regulator for self-excited generators.
Kutai EA07 Generator Automatic Voltage Regulator Operation Manual
User Manual 5 pages · 449 KB · ENOperation manual for Kutai EA07 automatic voltage regulator for brushless generators, covering wiring, adjustments, and field flashing procedures.
Kutai EA63-4 Generator Automatic Voltage Regulator Operation Manual
User Manual 5 pages · 474 KB · ENOperation manual for Kutai's EA63-4 generator automatic voltage regulator, covering setup, adjustment, and testing procedures.
Kutai ECU-02 Automatic Engine Control Unit Operators Manual
User Manual 22 pages · 1.2 MB · ENOperators manual for Kutai's ECU-02 automatic engine control unit, covering operation, programming, installation, and fault finding.
Kutai EA321 Generator Automatic Voltage Regulator Operation Manual
User Manual 6 pages · 584 KB · ENOperation manual for Kutai EA321 automatic voltage regulator for brushless generators, covering setup, adjustment, and protection features.
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in Kutai Electronics Industry Co., Ltd. manuals
How does the ECU-05 auto-start a generator?
It automatically mimics the action of turning a key by using standard two-wire signals from switches like an Automatic Transfer Switch or ON/OFF switch.
From: Kutai Electronics ECU-05 Ver1.0 Control Unit User Manual
Can the ECU-05 be used with gasoline engines?
Yes, by changing the DIP switch position on the ECU-05 to adapt for gasoline or gas engines.
From: Kutai Electronics ECU-05 Ver1.0 Control Unit User Manual
What are the available versions of the EA75A220 regulator?
The EA75A220 is available in two versions: EA75A220HL (Half Wave) and EA75A220FL (Full Wave).
From: Kutai EA75A220 Generator Automatic Voltage Regulator Operation Manual
How do I adjust the voltage stability?
Adjust the STAB (POT) anti-clockwise until the voltage becomes unstable, then slightly adjust it clockwise (about 1/5 turn) until the voltage is stable yet very close to becoming unstable.
From: Kutai EA75A220 Generator Automatic Voltage Regulator Operation Manual
How do I adjust the idle speed?
Short terminals 2 & 3 and use the IDLE SPEED potentiometer to adjust the idle speed.
From: Kutai EG3002 Electronic Engine Governor Controller User Manual
What is the EG3002 controller used for?
The EG3002 takes a signal from a magnetic pickup and compares it with a preset engine speed to control drive voltage to the actuator to maintain constant engine speed.
From: Kutai EG3002 Electronic Engine Governor Controller User Manual