Key facts
- Manuals
- 8
- Languages
- EN
- Last added
- 2023-10-15
Featured Electrocomponents plc manuals
Electrocomponents EDP-CM-LPC1768 CPU Module User Manual
The RS-EDP platform utilizes a single Command Module (CM) to accommodate various NXP microprocessors, including the LPC1768 (Cortex M3). The EDP-CM-LPC1768 module maps the I/O of this specific MCU to the backplane of the RS-EDP system. It supports 3.3V operation and includes extensive link options for dual-function pins.
Covers: Introduction · MCU Mapping · MCU Pin Allocation · Resources Used/Available · Alphabetical Listing of MCU Pins · Solder Link Options
Electrocomponents EDP System Phase 1 User Manual
The EDP System is a flexible embedded development board designed for industrial controllers, scientific instruments, and datalogging applications. It features an Extended Euro card size motherboard with four identical stations that support various plug-in processor and application modules.
The system utilizes standardized connectors (EDPCON1 and EDPCON2) to provide a unified interface for microcontrollers, including signals for I2C, CAN, SPI, motor control, and memory cards. The platform supports multiple CPU modules from manufacturers like ST Microelectronics and Infineon.
Covers: The EDP System · Reusable Components · Bread-Boarding Platform · EDP Modules Available Now · Basic EDP Concepts · Standardised Signal Set For Embedded Microcontrollers
EDP-CM-PIM Adapter Board User Manual
The EDP-CM-PIM module is an adapter board designed for the RS-EDP platform to support Microchip's family of devices, including the 8-bit PIC16Cxx, 16-bit dsPIC, and 32-bit PIC32 families. It connects between the RS-EDP baseboard and Microchip PIM modules.
The board is configured as a 'Command Module' that dictates whether the system operates at 3.3V or 5.0V via a link option setting on the Vcc_CM line. The daughter board remaps the I/O of the PIM module onto the backplane of the RS-EDP system, ensuring correct mapping for various devices such as the dsPIC33FJ256MC710 and PIC32Mx4xxFxxxL.
Covers: Introduction · MCU Mapping · MCU Pin Allocation · Backplane Resources Used by the MCU · Alphabetical Listing of MCU Pins · Jumper Options
Electrocomponents plc EDP-AM-MATRIX1 Prototyping Application Module User Manual
This document provides the user manual for the EDP-AM-MATRIX1 prototyping module designed for the RS-EDP modular development platform. The module is a PCB intended to fit both two-slot and four-slot base boards, utilizing the left-hand slot to accommodate additional electronic components for small to medium-sized designs. It features a variety of surface mount and through-hole footprints to support different component packages.
Covers: Introduction · Features · Prototype Area · Power Supply · Connectivity to the Back Plane · Mapping Aid
Latest Electrocomponents plc manuals
Electrocomponents EDP-CM-LPC1768 CPU Module User Manual
User Manual 28 pages · 2.2 MB · ENThis manual provides user instructions for the Electrocomponents plc EDP-CM-LPC1768 Command Module, detailing MCU mapping, pin allocation, and software support.
Electrocomponents EDP System Phase 1 User Manual
User Manual 68 pages · 2.7 MB · ENThis manual describes the structure, features, and usage of the Electrocomponents EDP System Phase 1 development platform.
EDP-CM-PIM Adapter Board User Manual
User Manual 27 pages · 1.8 MB · ENThis manual describes the EDP-CM-PIM adapter board used to connect Microchip dsPIC and PIC32 PIM modules to the RS-EDP baseboard.
Electrocomponents plc EDP-AM-MATRIX1 Prototyping Application Module User Manual
User Manual 13 pages · 2.2 MB · ENUser manual for the EDP-AM-MATRIX1 prototyping module, detailing features, power supply, connectivity, and signal mapping for the RS-EDP system.
Electrocomponents EDP-AM-MC2 Motor Drive Module User Manual
User Manual 60 pages · 6.1 MB · ENThis manual covers the operation, configuration, and software setup for the Electrocomponents EDP-AM-MC2 motor drive module.
Electrocomponents EDP-AM-DIO54 Digital IO Module User Manual
User Manual 22 pages · 890 KB · ENThis manual provides instructions for configuring and using the Electrocomponents EDP-AM-DIO54 digital I/O module, detailing its inputs, outputs, jumpers…
EDP-CM-XC167 CPU Module Manual
User Manual 29 pages · 1.4 MB · ENThis manual covers the EDP-CM-XC167 CPU module, detailing its features, connector pin mapping, jumper settings, and debugging toolchains for the RS-EDP system.
Electrocomponents EDP-CM-LPC2368 CPU Module User Manual
User Manual 28 pages · 2.2 MB · ENThis manual provides user instructions for the Electrocomponents EDP-CM-LPC2368 Command Module, detailing MCU mapping, solder link options, and software…
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in Electrocomponents plc manuals
What microprocessors does the EDP-CM-LPC1768 support?
The module is designed to accommodate four different device types, including LPC2368, LPC1768, LPC1343, and LPC1113.
From: Electrocomponents EDP-CM-LPC1768 CPU Module User Manual
What is the function of the Command Module in an RS-EDP system?
The Command Module maps the I/O of the MCU on the board to the backplane of the RS-EDP system.
From: Electrocomponents EDP-CM-LPC1768 CPU Module User Manual
What is the primary application for the EDP System?
Typical applications include industrial controllers, scientific instrument controllers, datalogging, and remote monitoring.
Which CPU modules are available for the EDP System?
Available processor modules include ST Microelectronics STR912 and Infineon XC167.
What Microchip device families are supported by this adapter board?
The board supports the 8 bit PIC16Cxx family, through to the 16bit dsPIC family and the new 32bit PIC32 family.
How is the system voltage level determined?
The 'Command Module' dictates whether the whole system is a 3.3V one or a 5.0V one using a link option.