TEXAS Manuals (Industrial)

The TMP421, TMP422, and TMP423 are remote temperature sensor monitors with a built-in local temperature sensor.

File format: PDF Size:658 KB

The DAC7624 and DAC7625 are 12-bit quad voltage output digital-to-analog converters with guaranteed 12-bit monotonic performance over the specified temperature range. They accept 12-bit parallel input data, have double-buffered DAC input logic (allowing simultaneous update of all DACs), and provide a readback mode of the internal input registers. An asynchronous reset clears all registers to a mid-scale code of 800H (DAC7624) or to a zero-scale of 000H (DAC7625). The DAC7624 and DAC7625 can operate from a single +5V supply or from +5V and –5V supplies. Low power and small size per DAC make the DAC7624 and DAC7625 ideal for automatic test equipment, DAC-per-pin programmers, data acquisition systems, and closed-loop servo-control. The DAC7624 and DAC7625 are available in a 28-pin plastic double-wide or a 28-lead SOIC package, and offer guaranteed specifications over the –40°C to +85°C temperature range.

File format: PDF Size:332 KB

The ADS1286 is a 12-bit, 20kHz analog-to-digital converter with a differential input and sample and hold amplifier and consumes only 250µA of supply cur- rent. The ADS1286 offers an SPI and SSI compatible serial interface for communications over a two or three wire interface. The combination of a serial two wire interface and micropower consumption makes the ADS1286 ideal for remote applications and for those requiring isolation. The ADS1286 is available in a 8-pin plastic mini DIP and a 8-lead SOIC.

File format: PDF Size:142 KB

The TMP400 is a remote and local temperature sensor monitor with a built-in local temperature sensor, ±1°C remote diode sensor, ±1°C local temperature sensor, programmable non-ideality factor, programmable series resistance cancellation, alert function, programmable resolution: 9 to 12 bits, programmable threshold limits, two-wire/SMBus™ serial interface

File format: PDF Size:610 KB

tps5420evm-175 is the evaluation module of tps5420 power converter, which supports 5.5v to 36v input voltage and maximum output current of 2a. it can be used to demonstrate the characteristics of tps5420 power converter.

File format: PDF Size:408 KB

TPA2026D2 is a stereo, filter-free Class-D audio power amplifier with volume control, dynamic range compression (DRC), and automatic gain control (AGC) functions. It is suitable for power supply range from 2.5V to 5.5V, with output power of 3.2W/Ch (4Ω, 5V) and 750mW/Ch (8Ω, 3.6V). The DRC/AGC parameters, including gain range, attack/release/hold times, compression ratio, etc., can be programmed and configured via a digital I2C interface.

File format: PDF Size:887 KB

This document is an important notice for Texas Instruments (TI) bq241xx (bqSWITCHER�) user's guide EVM. This evaluation kit is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY and is not considered by TI to be fit for commercial use.

File format: PDF Size:369 KB

This user manual describes how to get started with the Development Kit. You will also find detailed description of the evaluation board and advice how to develop your own applications.

File format: PDF Size:578 KB

schs204j is a high-speed silicon-gate cmos device with excellent vco frequency linearity and minimal frequency drift, suitable for fm modulation and demodulation, frequency synthesis and multiplication, frequency discrimination, tone decoding, data synchronization and conditioning, voltage-to-frequency conversion and motor speed control.

File format: PDF Size:439 KB

The LMV321, LMV358, and LMV324/LMV324S are single, dual, and quad low-voltage (2.7 V to 5.5 V) operational amplifiers with rail-to-rail output swing. The LMV324S, which is a variation of the standard LMV324, includes a power-saving shutdown feature that reduces supply current to a maximum of 5 µA per channel when the amplifiers are not needed. Channels 1 and 2 together are put in shutdown, as are channels 3 and 4. While in shutdown, the outputs actively are pulled low. The LMV321, LMV358, LMV324, and LMV324S are the most cost-effective solutions for applications where low-voltage operation, space saving, and low cost are needed. These amplifiers were designed specifically for low-voltage (2.7 V to 5 V) operation, with performance specifications meeting or exceeding the LM358 and LM324 devices that operate from 5 V to 30 V. Additional features of the LMV3xx devices

File format: PDF Size:877 KB

the tps5103 is a synchronous buck dc/dc controller, designed for notebook pc system power.

File format: PDF Size:1053 KB

The LMV321, LMV358, and LMV324/LMV324S are low-voltage (2.7 V to 5.5 V) operational amplifiers with rail-to-rail output swing. The LMV324S, which is a variation of the standard LMV324, includes a power-saving shutdown feature that reduces supply current to a maximum of 5 μA per channel when the amplifiers are not in use.

File format: PDF Size:1118 KB

The SN65MLVD040 is a TI-produced 4-channel half-duplex M-LVDS line transceiver that meets the TIA/EIA-899 (M-LVDS) standard and is used to transmit and receive multipoint low-voltage differential signals. This device has independent enable pins that can control the driver output voltage transition time to improve signal quality.

File format: PDF Size:829 KB

SN54273, SN54LS273, SN74273, SN74LS273 OCTAL D-TYPE FLIP-FLOP WITH CLEAR is an eight-bit D flip-flop with single-rail outputs produced by Texas Instruments. It has buffered clock and direct clear inputs and individual data inputs to each flip-flop. This product can be applied to buffer/storage registers, shift registers and pattern generators.

File format: PDF Size:96 KB

File format: PDF Size:0 KB

This document describes the features and characteristics of SN54LS373, SN54LS374, SN54S373, SN54S374, SN74LS373, SN74LS374, SN74S373, and SN74S374 octal D-type transparent latches and edge-triggered flip-flops. These devices have 3-state outputs designed for driving highly capacitive or relatively low-impedance loads. The high-impedance 3-state and increased high-logic-level drive allow these registers to be connected directly to and drive the bus lines in a bus-organized system without the need for interface or pullup components. These devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

File format: PDF Size:641 KB

bq2060 is a battery fuel gauge IC produced by ti company. It can measure battery voltage, current, remaining capacity, and provide battery remaining run-time predictions. bq2060 supports 2-wire SMBus v1.1 interface or 1-wire HDQ16 measurement, and can monitor and provide control to charge and discharge FETs in Li-Ion protection circuit.

File format: PDF Size:823 KB

CC1021 is a single chip low power RF transceiver designed for narrowband systems. It supports 433, 868 and 915MHz ISM/SRD band and can be used for Automatic Meter Reading, Wireless Alarm and Security Systems, Home Automation, Low Power Telemetry and Automotive (RKE/TPMS).

File format: PDF Size:971 KB

The TLE4275 is a monolithic integrated low-dropout voltage regulator that provides an output voltage of 5 V (±2%). The device features a very low current consumption, power-on and undervoltage reset, a reset low-level output voltage of less than 1 V, a very low dropout voltage, short-circuit protection, reverse-polarity protection, and ESD protection of >6 kV.

File format: PDF Size:322 KB

MAX202 is a TI-launched 5V dual RS-232 line driver/receiver with ±15kV ESD protection, which meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards, operates at 5V VCC supply and can achieve data transmission rates of up to 120 kbit/s.

File format: PDF Size:379 KB