TEXAS Manuals (Industrial)

The TMP112 is a high-accuracy, low-power, digital temperature sensor from TI. It is available in a tiny SOT563 package and requires no external components. It can read temperatures to a resolution of 0.0625°C from 0°C to +65°C with a maximum accuracy of 0.5°C. From -40°C to +125°C, the maximum accuracy is 1.0°C. The TMP112 also has both SMBus and two-wire interface compatibility, allowing up to four devices to be connected to one bus. It also features an SMBus alert function. The TMP112 is ideal for extended temperature measurement in communication, computer, consumer, environmental, industrial, and instrumentation applications.

File format: PDF Size:534 KB

The MSP430x11x2/12x2 series are low-power 16-bit MCUs that include the MSP430F1122/F1132 and MSP430F1222/F1232 products. The series MCUs operate in the 1.8 V to 3.6 V power supply range and provide 200 µA active mode current, 0.7 µA standby mode current, and 0.1 µA power down mode current. The MSP430x11x2/12x2 series MCUs feature many low-power characteristics, including five power saving modes, a low standby mode wake-up time, and a 125 ns instruction cycle time.

File format: PDF Size:1134 KB

bq24180 is a fully integrated switch-mode single-cell Li-Ion charger with full USB compliance and accessory power connection.

File format: PDF Size:2991 KB

This reference manual provides a detailed description of bq20z60-R1/bq20z65-R1 battery management ICs, including protection features, gas gauging, charge control, LED display, device operating mode, etc.

File format: PDF Size:1274 KB

The CC1101 is a low-cost sub-1GHz transceiver designed for very low-power wireless applications.

File format: PDF Size:1037 KB

This data sheet introduces the features and characteristics of CD54HC540F3A. The product is an eight-channel buffer and line driver with three-state outputs and the ability to drive 15 LSTTL loads.

File format: PDF Size:44 KB

ADS8343 is a 16-bit, 4-channel serial output sampling analog-to-digital converter produced by Texas Instruments. It has bipolar input range, single supply, 4-channel single-ended or 2-channel differential input, up to 100kHz conversion rate, 86dB SINAD and SSOP-16 package.

File format: PDF Size:531 KB

The ADS1232/ADS1234 are 24-bit analog-to-digital converters (ADCs) with an onboard, low-noise programmable gain amplifier (PGA), precision delta-sigma ADC and internal oscillator, providing a complete front-end solution for bridge sensor applications including weigh scales, strain gauges and pressure sensors.

File format: PDF Size:154 KB

The ADS7844 is an 8-channel, 12-bit sampling analog-to-digital converter (ADC) with a synchronous serial interface. Typical power dissipation is 3mW at a 200kHz throughput rate and a +5V supply. The reference voltage (VREF) can be varied between 100mV and VCC, providing a corresponding input voltage range of 0V to VREF. The device includes a shutdown mode that reduces power dissipation to under 1µW. The ADS7844 is ensured down to 2.7V operation. Low power, high speed, and onboard multiplexer make the ADS7844 ideal for battery-operated systems such as personal digital assistants, portable multichannel data loggers, and measurement equipment. The serial interface also provides low-cost isolation for remote data acquisition. The ADS7844 is available in a 20-lead QSOP package and the MAX147 equivalent 20-lead SSOP package and is ensured over the –40°C to +85°C temperature range.

File format: PDF Size:395 KB

The TPS799xx family is a low-dropout (LDO) low-power linear regulator with excellent AC performance, low noise, high PSRR, and fast start-up time.

File format: PDF Size:873 KB

The TLC7226C, TLC7226I, and TLC7226M are chips that integrate four 8-bit voltage-output digital-to-analog converters (DACs) with output buffer amplifiers and interface logic. They are suitable for applications such as process control, automatic test equipment, and automatic calibration of large system parameters.

File format: PDF Size:265 KB

File format: PDF Size:0 KB

The DAC3283 is a dual-channel 16-bit 800 MSPS digital-to-analog converter (DAC) with features such as an 8-bit input LVDS data bus, wideband communications, digital synthesis, and multi-DAC synchronization.

File format: PDF Size:1520 KB

The DAC7644 is a 16-bit, quad voltage output digital- to-analog converter with guaranteed 15-bit monotonic performance over the specified temperature range.

File format: PDF Size:368 KB

The INA145 is a precision, unity-gain difference amplifier consisting of a precision op amp and on-chip precision resistor network. Two external resistors set the gain from 1V/V to 1000V/V. The input common-mode voltage range extends beyond the positive and negative rails. On-chip precision resistors are laser-trimmed to achieve accurate gain and high common-mode rejection. Excellent TCR tracking of these resistors assures continued high precision over temperature. The INA145 is available in the SO-8 surface-mount package specified for the extended industrial temperature range, -40°C to +85°C.

File format: PDF Size:325 KB

This datasheet provides the technical specifications of ABT8646, including product features, characteristics, model, brand, etc.

File format: PDF Size:549 KB

SN54AHC138 and SN74AHC138 are 3-line to 8-line decoders/demultiplexers designed specifically for high-speed memory decoders and data-transmission systems. They incorporate three enable inputs to simplify cascading and/or data reception. They have latch-up performance exceeding 250 mA, and ESD protection exceeding 2000 V human-body model, 200 V machine model, and 1000 V charged-device model.

File format: PDF Size:683 KB

SRC4192 and SRC4193 are asynchronous sample rate converters designed for professional and broadcast audio applications. They combine a wide input-to-output sampling ratio with outstanding dynamic range and ultra low distortion. Input and output serial ports support standard audio formats as well as a Time Division Multiplexed (TDM) mode. Flexible audio interfaces allow SRC4192 and SRC4193 to connect to a wide range of audio data converters, digital audio receivers and transmitters, and digital signal processors. SRC4192 is a standalone pin programmed device, with control pins for mode, data format, mute, bypass, and low group delay functions. SRC4193 is a software-controlled device featuring a serial peripheral interface (SPI) port, which is utilized to program all functions via internal control registers. SRC4192 and SRC4193 may be operated from a single +3.3V power supply. A separate digital I/O supply (VIO) operates over the +1.65V to +3.6V supply range, allowing greater flexibility when interfacing to current and future generation signal processors and logic devices. Both the SRC4192 and SRC4193 are available in a 28-lead SSOP package.

File format: PDF Size:1034 KB

CC1000 is a true single-chip UHF transceiver designed for very low power and very low voltage wireless applications.

File format: PDF Size:983 KB

The PCA9546A is a quad bidirectional translating switch controlled via the I2C bus. It features 1.8V, 2.5V, 3.3V and 5V support, low standby current, I2C bus and SMBus compatibility, 5.5V tolerant inputs, three address pins, 0 to 400kHz clock frequency, I2C bus channel selection, ESD protection, low RON switches, no glitch on power up and hot insertion.

File format: PDF Size:1193 KB