TEXAS Manuals (Industrial)

TPS5430/31 is a 3A, wide input range step-down Swift converter from TI, used in consumer, industrial and car audio power supplies, battery chargers, high power LED supply and so on.

File format: PDF Size:806 KB

The PCM1753/54/55 is a CMOS, monolithic, integrated circuit that includes stereo digital-to-analog converters and support circuitry in a small 16-lead SSOP package. The data converters use TI's TAS5606B 24-bit, 192kHz Enhanced Multi-Level, Delta-Sigma architecture. The 4x/8x oversampling digital filter provides -50dB stop-band attenuation and ±0.04dB pass-band ripple and supports 16-bit, 18-bit, 20-bit and 24-bit audio formats with software control.

File format: PDF Size:310 KB

The bq24155 is a high-efficiency single-cell lithium-ion battery charger that is suitable for a wide range of portable applications. The charger can be programmed through an I2C interface to set battery charging parameters. The bq24155 integrates a synchronous PWM controller, power FETs, input current sensing, high-accuracy current and voltage regulation, and charge termination, into a small WCSP package.

File format: PDF Size:1609 KB

The TPS1120 is a dual p-channel enhancement-mode MOSFET with a maximum VGS(th) of -1.5V and an IDSS of only 0.5µA, making it the ideal high-side switch for low-voltage portable battery-management systems.

File format: PDF Size:203 KB

The bq2420x series are simple Li-Ion linear charge management devices targeted at low-cost and space limited charger applications. The bq2420x series offer integrated powerFET, high-accuracy voltage regulation, temperature monitoring, charge status, and charge termination, in a single monolithic device.

File format: PDF Size:230 KB

the tps1100 is a single p-channel enhancement-mode mosfet from ti company. it is suitable for 3v or 5v power distribution and has low rDS(on), low vGS(th), and TTL and CMOS compatible inputs. it can be used in battery management systems, pulse-width modulated controllers or motor/bridge drivers.

File format: PDF Size:179 KB

The OPA564 is a low-cost, high-current operational amplifier that is ideal for driving up to 1.5A into reactive loads. It features high gain-bandwidth product, large output swing, fast response, and complete protection.

File format: PDF Size:1090 KB

TL16C752B is an enhanced version of ST16C2550, which supports 3.3V power supply and a maximum baud rate of 1.5Mbps (crystal 24MHz input clock) and supports 64-byte transmit and receive FIFOs

File format: PDF Size:439 KB

The MSP430x4xx family is a low-power microcontroller manufactured by Texas Instruments. It features a 16-bit RISC architecture, a 12-bit A/D converter, a 16-bit Timer_B and Timer_A, a serial communication interface (USART), a brownout detector, a supply voltage monitor, serial on-board programming, and more.

File format: PDF Size:1241 KB

The CC2500 is a low-cost 2.4 GHz transceiver designed for very low-power wireless applications. Applications include 2400-2483.5 MHz ISM/SRD band systems, including consumer electronics, wireless game controllers, wireless audio, wireless keyboard and mouse, RF enabled remote controls.

File format: PDF Size:1160 KB

File format: PDF Size:0 KB

The TPS793xx family of low-dropout (LDO) low-power linear voltage regulators features high power-supply rejection ratio (PSRR), ultralow-noise, fast start-up, and excellent line and load transient responses in NanoStar wafer chip scale and SOT23 packages. NanoStar packaging gives an ultrasmall footprint as well as an ultralow profile and package weight, making it ideal for portable devices and wireless communication applications.

File format: PDF Size:453 KB

This document is the data manual for TMS320F2810, TMS320F2811, TMS320F2812, TMS320C2810, TMS320C2811, TMS320C2812 digital signal processors. The manual provides technical specifications, features, and application scenarios of the products.

File format: PDF Size:2402 KB

CD54HC540F3A is a non-inverting eight-channel buffer and line driver with three-state outputs and the capability to drive 15 LSTTL loads produced by Harris Semiconductor.

File format: PDF Size:322 KB

This datasheet introduces the features and characteristics of the DAC8718 from TI. The DAC8718 is a low-power, octal, 16-bit digital-to-analog converter.

File format: PDF Size:1766 KB

SN54AC245, SN74AC245 is an 8-bit asynchronous bidirectional data bus transceiver produced by Texas Instruments, which can work normally in the entire military temperature range (-55°C to 125°C).

File format: PDF Size:538 KB

TAS5711 is a 20W digital audio power amplifier with EQ, DRC, and 2.1 mode. It can deliver 20W into an 8Ω load from an 18V supply with up to 90% efficiency. The amplifier operates in Class-D, eliminating the need for heatsinks. It has a signal-to-noise ratio of 106dB and supports speaker equalization and dynamic range compression. The amplifier supports various audio input/output modes and can be used in applications such as televisions, iPod™ Docks, and sound bars.

File format: PDF Size:2055 KB

This manual describes the features, functions, and applications of the TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801, TMS320C2802, TMS320C2801, and TMS320F2801x DSPs.

File format: PDF Size:1303 KB

The INA121 is a low power instrumentation amplifier offering excellent accuracy. Its versatile three-op amp design and very small size make it ideal for a variety of general purpose applications.

File format: PDF Size:363 KB

The ADS1146, ADS1147, and ADS1148 are highly-integrated, precision, 16-bit analog-to-digital converters (ADCs). They feature an onboard, low-noise, programmable gain amplifier (PGA), a precision delta-sigma ADC with a single-cycle settling digital filter, and an internal oscillator. The ADS1147 and ADS1148 also provide system monitoring capabilities and dual current digital-to-analog converters.

File format: PDF Size:727 KB