MOTOROLA Manuals (Industrial)

This document introduces the features and characteristics of Motorola MCM64PC32T and MCM64PC64T products. These two products are high-performance L2 caches designed for the Pentium microprocessor in conjunction with Intel's Triton II chip set.

File format: PDF Size:168 KB

This datasheet provides detailed information on the pin functions, electrical parameters, applications circuits, and package type of MC54/74HC139A.

File format: PDF Size:184 KB

This is a PDF document about BRT (Bias Resistor Transistor). It is an integrated circuit that integrates two resistors, a series base resistor and a base-emitter resistor. The BRT can replace a single device and its external resistor bias network. The device uses SC-59 package, which is designed for low power surface mount applications.

File format: PDF Size:237 KB

This document is about MRF1047T1 technical data sheet, which details the features and characteristics of the product, including low noise characteristics, high current gain-bandwidth product, maximum stable gain, output third order intercept, etc.

File format: PDF Size:227 KB

This is a summary of the MCM67J518 datasheet. It is a 32K x 18-bit high-speed SRAM for the i486 and Pentium microprocessors' cache. It includes input registers, a 2-bit counter, high-speed SRAM, and high drive registered output drivers, integrated into a single monolithic circuit for reduced part count implementation of cache data RAM applications.

File format: PDF Size:219 KB

The MC54/74HC365 is a high-performance silicon-gate CMOS, identical in pinout to the LS365. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device is a high-speed hex buffer with 3-state outputs and two common active-low Output Enables. When either of the enables is high, the buffer outputs are placed into high-impedance states. The HC365 has noninverting outputs.

File format: PDF Size:104 KB

File format: PDF Size:13760 KB

The MC7900 series of fixed output negative voltage regulators are intended as complements to the popular MC7800 series devices. These negative regulators are available in the same seven–voltage options as the MC7800 devices. In addition, one extra voltage option commonly employed in MECL systems is also available in the negative MC7900 series. Available in fixed output voltage options from –5.0 V to –24 V, these regulators employ current limiting, thermal shutdown, and safe–

File format: PDF Size:187 KB

The MC14499 is a 7-segment alphanumeric LED decoder/driver with a serial interface port to provide communication with CMOS microprocessors and microcomputers. This device features NPN output drivers which allow interfacing to common cathode LED displays through external series resistors.

File format: PDF Size:162 KB

File format: PDF Size:777 KB

This document describes the features and characteristics of Motorola Thyristors, and their applications in full-wave AC control. These devices are designed for full-wave silicon gate controlled solid-state devices, such as solid-state relays, motor controls, heating controls, and power supplies. Triac type thyristors can switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering. The devices have high blocking voltage, parameter uniformity, stability, low thermal resistance, high heat dissipation, and durability.

File format: PDF Size:74 KB

The MPX5100/MPXV5100 series piezoresistive transducer is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, particularly those employing a microcontroller or microprocessor with A/D inputs. This sensor combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.

File format: PDF Size:398 KB

The MCM67M518 is a synchronous static random access memory designed to provide a burstable, high-performance, secondary cache for the MC68040 and PowerPC microprocessors. It is fabricated using Motorola's high-performance silicon-gate BiCMOS technology and integrates input registers, a 2-bit counter, high-speed SRAM, and high drive capability outputs onto a single monolithic circuit. The synchronous design allows precise cycle control with the use of an external clock. Bursts can be initiated with either transfer start processor or transfer start cache controller input pins. Write cycles are internally self-timed and initiated by the rising edge of the clock input.

File format: PDF Size:209 KB

The MC10SX1126 is an integrated limiting amplifier for high frequency fiber optic applications. The device interfaces directly to the trans-impedance amplifier of a typical optical to electrical conversion portion of a fiber optic link. With data rate capabilities in the 1.25Gb/s range, the high gain limiting amplification of the SX1126 is ideal for high speed fiber optic applications like SONET/SDM, ATM, FDDI, Fibre Channel or Serial Hippi. The device is functionally and pin compatible to the Signetics SA5225 with a significantly higher bandwidth. The CAZP and CAZN inputs to the limiting amplifier provide an auto-zero function to effectively cancel any input offset voltage present in the amplifier. The SX1126 incorporates a programmable level detect function to identify when the input signal has been lost. This information can be fed back to the Disable input of the device to maintain stability under loss of signal conditions. Using the Vset pin the sensitivity of the level detect can be adjusted. The CLD input is used to filter the level detect input so that random noise spikes are filtered out. The MC10SX1126 is compatible with MECL10H logic levels.

File format: PDF Size:84 KB

This data sheet provides information on the B130 Schottky diode. It has a low forward voltage drop, a small package, and good stability and high temperature resistance.

File format: PDF Size:65 KB

This document introduces the MPX2010/MPXV2010G series silicon piezoresistive pressure sensors, which provide a very accurate and linear voltage output that is directly proportional to the applied pressure. These sensors house a single monolithic silicon die with the strain gauge and thin-film resistor network integrated on each chip. The sensor is laser trimmed for precise span, offset calibration and temperature compensation.

File format: PDF Size:316 KB

This document describes the features and characteristics of the Motorola M68HC12 microcontroller MC68HC912D60/D.

File format: PDF Size:2742 KB

500 milliwatt glass sealed zener diodes

File format: PDF Size:270 KB

File format: PDF Size:716 KB

P6SMB160 is a type of P6SMB series and a MOSFET device launched by ON Semiconductor.

File format: PDF Size:247 KB