MOTOROLA Manuals (Industrial)

This document describes high-speed hex buffers with 3-state outputs. They can be organized as a single 6-bit or 2-bit/4-bit, with inverting or non-inverting data paths. The outputs can drive 15 TTL Unit Loads or 60 Low Power Schottky loads when the Enable is LOW. When the Output Enable is HIGH, the outputs are forced to a high impedance 'off' state. If the outputs of the 3-state devices are tied together, all but one device must be in the high impedance state to avoid high currents that would exceed the maximum ratings. Designers should ensure that Output Enable signals to 3-state devices whose outputs are tied together are designed so there is no overlap.

File format: PDF Size:53 KB

B320-60 Rectifier Device Data is a rectifier diode produced by ON Semiconductor. It is designed for use in switching power supplies, inverters and other inductive switching circuits. Its features are extremely fast switching, extremely low forward drop, platinum barrier with avalanche guardrings, and guaranteed reverse avalanche. The product's appearance is epoxy resin packaging, weighing about 0.4 grams, and has corrosion resistance. The soldering temperature can reach 260°C.

File format: PDF Size:95 KB

The BD776/777/778 series is a high performance NPN type Bipolar power transistor with high DC current gain, low saturation voltage, low on resistance and good switching characteristics, suitable for general purpose amplifier and high-speed switching applications.

File format: PDF Size:118 KB

This data sheet provides the maximum ratings, thermal characteristics, device marking, electrical characteristics, etc. of BC846, BC847, BC850, BC848, BC849 small signal transistors

File format: PDF Size:222 KB

2N6387/2N6388 are Motorola bipolar power transistors available in a TO-220AB compact package. These transistors feature high DC current gain, low saturation voltage and built-in base-emitter shunt resistors, making them suitable for general-purpose amplifier and low-speed switching applications.

File format: PDF Size:165 KB

This document provides information on Motorola's small-signal transistors, FETs, and diodes. It includes a PNP silicon surface mount transistor with a monolithic bias resistor network. These digital transistors are designed to replace a single device and its external resistor bias network. The product simplifies circuit design, reduces board space, and reduces component count.

File format: PDF Size:95 KB

This document introduces Motorola's IGBT device, which has a high temperature short circuit capability and a low VCE(on), suitable for high frequency operation. It also features energy efficiency, ESD protection, and ruggedness.

File format: PDF Size:142 KB

This document is the MRFIC0930/DM low noise amplifier product manual, which is mainly used in 900MHz wireless communication systems such as GSM, AMPS and industrial, scientific and medical (ISM) band applications. The amplifier has a typical gain of 19dB and a typical noise figure of 1.7dB, and has a simple off-chip input matching function.

File format: PDF Size:255 KB

This datasheet provides the characteristics parameters of MC54/74HC14A, including pin definition, package information, logic function table, ordering information, etc.

File format: PDF Size:180 KB

File format: PDF Size:276 KB

File format: PDF Size:276 KB

MC92501 is the second generation ATM cell processor in MotorolaÕs 92500 series. It provides comprehensive ATM layer functions, and is compliant with UTOPIA Level 2 physical and switch interfaces.

File format: PDF Size:296 KB

File format: PDF Size:0 KB

This document mainly introduces the application of MOTOROLA MC92314 DVB-T single chip demodulator

File format: PDF Size:713 KB

This document introduces the features and characteristics of MOTOROLA MC92308 OFDM demodulator

File format: PDF Size:27 KB

The MC92307 is a pipelined Fast Fourier Transformation (FFT) processor with a blocklength of 2048 complex samples, which is designed for use in digital terrestrial Set-Top boxes according to the DVB-T standard for 2K transmission.

File format: PDF Size:95 KB

The MC92305 is a high performance digital demodulator/decoder optimized for demodulation and block error correction of QAM signals used in Digital Video Broad- cast by Cable (DVB-C) and DAVIC 1.0 compliant applications.

File format: PDF Size:25 KB

The MC92303 is a coherent digital demodulator for QPSK and BPSK modulated signals utilized in Digital-TV applications according to the EBU defined DVB transmis- sion standard for satellite Set-Top systems or similar.

File format: PDF Size:26 KB

File format: PDF Size:0 KB

MC92053 is a quad-channel Framer chip produced by Motorola for FTTC networks. It supports the DAVIC short-range baseband asymmetrical physical layer standard and communicates with ATM layer devices through the UTOPIA Level 2 interface.

File format: PDF Size:34 KB