MOTOROLA Manuals (Industrial)

The MCM64PC32 (256K) and MCM64PC64 (512K) are designed to provide a burstable, high performance, L2 cache for the Pentium microprocessor in conjunction with Intel’s Triton II chip set. The MCM64PC32 is configured as 32K x 64 bits and the MCM64PC64 is configured as 64K x 64 bits. Both are packaged in a 160 pin card edge memory module. Each module uses Motorola’s 3.3 V 32K x 32 BurstRAMs and one Motorola 3.3 V 32K x 8 FSRAM for the tag RAM. Bursts can be initiated with either address status processor (ADSP) or cache address status (CADS). Subsequent burst addresses are generated internal to the BurstRAM by the cache burst advance (CADV) input pin. Write cycles are internally self timed and are initiated by the rising edge of the clock (CLK0) input. Eight write enables are provided for byte write control. PD0-PD3 map into the Triton II chip set for auto-configuration of the cache control. Pentium-Style Burst Counter on Chip. Pipelined Data Out. 160 Pin Card Edge Module. Address Pipeline Supported by ADSP Disabled with Ex. All Cache Data and Tag I/Os are TTL Compatible. Three State Outputs. Byte Write Capability. Fast Module Clock Rate: 66 MHz. Fast SRAM Access Times: 15 ns for Tag RAM, 8 ns for Data RAMs. One-Cycle Deselect Data RAMs. Decoupling Capacitors for Each Fast Static RAM. High Quality Multi-Layer FR4 PWB with Separate Power and Ground.

File format: PDF Size:181 KB

The MC74LVQ138 is a high performance, 1–of–8 decoder/ demultiplexer operating from a 2.7 to 3.6V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. The MC74LVQ138 is suitable for memory address decoding and other TTL level bus oriented applications.

File format: PDF Size:223 KB

MC54/74HC138A is the upgraded version of MC54/74HC138, which supports LSTTL output. This chip can decode three-bit address into eight outputs, and supports three selection functions: decoding, cascading and selection.

File format: PDF Size:237 KB

The MC10103 is a quad 2-input OR gate that provides one gate with OR/NOR outputs. It has low power consumption and fast response time.

File format: PDF Size:101 KB

File format: PDF Size:248 KB

This document is about MC74HC367A technical data sheet. The chip has a 15 LSTTL load drive capability, outputs directly interface to CMOS, NMOS, TTL, operating voltage range is 2 to 6V, input current is 1µA, complies with JEDEC standard 7A requirements, and chip complexity is 92 FETs or 23 equivalent gates.

File format: PDF Size:157 KB

MCM67J618B is a 1,179,648 bit synchronous static random access memory designed to provide a burstable, high–performance, secondary cache for the i486 and Pentium microprocessors.

File format: PDF Size:204 KB

Introduced the functional characteristics of the MC74F195 4-Bit Parallel Access Shift Register. The device is useful in a wide variety of shifting, counting, and storage applications. It performs serial, parallel, serial-to-parallel, or parallel-to-serial data transfers at very high speeds.

File format: PDF Size:79 KB

This is a transistor with two resistors integrated, which can simplify circuit design, reduce board space and reduce the number of components.

File format: PDF Size:239 KB

The MPC561/MPC562 / MPC563/MPC564 are members of the Motorola MPC500 RISC Microcontroller family, featuring high-performance CPU system, peripheral pin multiplexing, flash and code compression options.

File format: PDF Size:120 KB

File format: PDF Size:302 KB

MHPA19010 is a Motorola RF device designed for Class AB amplifier applications in 50 ohm systems operating in the PCS frequency band. A silicon FET design provides outstanding linearity and gain. In addition, its excellent group delay and phase linearity characteristics are ideal for digital modulation systems, such as TDMA and CDMA.

File format: PDF Size:321 KB

The MCM69R736A/818A is a 4 megabit synchronous late write fast static RAM designed for high performance in secondary cache, ATM switch, Telecom, and other high-speed memory applications. It is fabricated in Motorola's high-performance silicon gate BiCMOS technology and features HSTL inputs and outputs, adjustable input trip-point, output voltage, synchronous write, and byte enable.

File format: PDF Size:230 KB

File format: PDF Size:564 KB

The MC10EL/100EL01 is a 4-input OR/NOR gate that is functionally equivalent to the E101 device with higher performance capabilities. With propagation delays and output transition times significantly faster than the E101, the EL01 is ideally suited for those applications which require the ultimate in AC performance.

File format: PDF Size:51 KB

The MAC7100 family of microcontrollers are pin-compatible members of a family of 32-bit flash-memory based devices developed specifically for embedded automotive applications.

File format: PDF Size:1425 KB

MC68332 is a 32-bit modular microcontroller manufactured by Motorola. It has high-performance data manipulation capabilities and powerful peripheral subsystems.

File format: PDF Size:407 KB

File format: PDF Size:0 KB

File format: PDF Size:238 KB

MRF175LU MRF175LV1 is a RF device from Motorola. This device uses a single-ended circuit and operates at frequencies up to 400MHz. It has high power, high gain and broadband performance, making it suitable for use in solid-state transmitters for FM broadcast or TV channel frequency bands.

File format: PDF Size:142 KB