ANALOG Manuals (Industrial)

File format: PDF Size:330 KB

File format: PDF Size:457 KB

The AD10678 is a 16-bit, 80 MSPS analog-to-digital converter for applications that demand increased SNR levels. Exceptional noise performance and a typical signal-to-noise ratio of 80 dBFS are obtained by digitally programmed gain control, and multiple digital output formats are provided.

File format: PDF Size:663 KB

AD10677 is a 16-bit high performance analog-to-digital converter for applications that demand increased SNR levels.

File format: PDF Size:633 KB

This document is the technical manual for AD10465. AD10465 is a dual-channel, 14-bit, 65 MSPS A/D converter with analog input signal conditioning features. The features of AD10465 include: dual-channel, 65 MSPS minimum sample rate; channel-to-channel matching, ±0.5% gain error; channel-to-channel isolation, >90 dB; DC-coupled analog input signal conditioning; selectable bipolar input voltage range (-0.5 V, -1.0 V, -2.0 V); gain flatness up to 25 MHz: <0.2 dB; 80 dB spurious-free dynamic range; two's complement output format; 3.3 V or 5 V CMOS-compatible output levels; 1.75 W per channel; industrial and military grade.

File format: PDF Size:2425 KB

The AD9216 is a dual, 3 V, 10-bit, 65/80/105 MSPS analog-to-digital converter. It features dual high performance sample-and hold amplifiers, low power and programmable data format.

File format: PDF Size:263 KB

The AD9215 is a 10-bit, 65/80/105 MSPS, 3 V A/D converter from Analog Devices. It features single 3 V supply operation, SNR = 58 dBc (to Nyquist), SFDR = 77 dBc (to Nyquist), low power ADC core, differential input, 300 MHz bandwidth, On-chip reference and sample-and-hold amplifier, DNL = ±0.25 LSB, flexible analog input, offset binary or twos complement data format, clock duty cycle stabilizer, and is used in ultrasound equipment, IF sampling in communications receivers, battery-powered instruments, hand-held scopemeters, and low cost digital oscilloscopes.

File format: PDF Size:1044 KB

This document introduces the AD9214 10-bit, 65/80/105 MSPS 3 V A/D converter's features, including conversion rate, power consumption, dynamic range, sampling bandwidth, reference voltage, input range, and data format.

File format: PDF Size:1044 KB

The AD9203 is a monolithic low power, single supply, 10-bit, 40 MSPS analog-to-digital converter, with an on-chip voltage reference. The AD9203 uses a multistage differential pipeline architecture and guarantees no missing codes over the full operating temperature range. Its input range may be adjusted.

File format: PDF Size:221 KB

The AD9202 is a monolithic, single supply, 10-bit, 32 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference. It uses a multistage differential pipeline architecture at 32 MSPS data rates and features low power consumption, three-state outputs, and an out-of-range indicator.

File format: PDF Size:348 KB

The AD9201 is a complete dual channel, 20 MSPS, 10-bit CMOS ADC. It is optimized specifically for applications where close matching between two ADCs is required (e.g., I/Q channels in communications applications). The 20 MHz sampling rate and wide input bandwidth will cover both na...

File format: PDF Size:443 KB

The AD9200 is a monolithic, single supply, 10-bit, 20 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference. The AD9200 uses a multistage differential pipeline architecture at 20 MSPS data rates and guarantees 0.5 LSB of differential nonlinearity.

File format: PDF Size:344 KB

The AD9071 is a monolithic sampling analog-to-digital converter with an on-chip track-and-hold circuit and TTL/CMOS digital interfaces. The product operates at a 100 MSPS conversion rate with outstanding dynamic performance over its full operating range. The ADC requires only a single 5 V supply and an encode clock for full performance operation. The digital outputs are TTL compatible. Separate output power supplies are not required.

File format: PDF Size:168 KB

The AD9070 is a monolithic sampling analog-to-digital converter with an on-chip track-and-hold circuit and ECL digital interfaces. The product operates at a 100 MSPS conversion rate with outstanding dynamic performance over its full operating range. The ADC requires only a single –5 V supply.

File format: PDF Size:260 KB

The AD9066 is a dual 6-bit ADC that has been optimized for low-cost in-phase and quadrature (I and Q) demodulators. Primary applications include digital direct broadcast satellite applications where broadband quadrature phase shift keying (QPSK) modulation is used. The AD9066 provides an internal voltage reference and operates from a single +5 volt power supply to reduce total system cost and power dissipation.

File format: PDF Size:98 KB

The OP467 is a quad, high speed, precision operational amplifier that combines the performance of a high speed op amp with the advantages of a precision operational amplifier in a single package. It is an ideal choice for applications where, traditionally, more than one op amp was used to achieve this level of speed and precision. The OP467's internal compensation ensures stable unity-gain operation, and it can drive large capacitive loads with excellent transient response.

File format: PDF Size:246 KB

The AD9060 is a 10-bit/75 MSPS monolithic converter capable of word rates of 75 MSPS and above. Innovative architecture using 512 input comparators instead of the traditional 1024 required by other flash converters reduces input capacitance and improves linearity. Inputs and outputs are ECL-compatible, which makes the AD9060 the recommended device for these applications.

File format: PDF Size:223 KB

The AD9059 is a low-cost, low-power, small-size, easy-to-use dual 8-bit monolithic analog-to-digital converter with a 60 MSPS encode rate capability and a typical full-power analog bandwidth of 120 MHz. The component is ideal for applications requiring multiple ADCs with excellent dynamic performance.

File format: PDF Size:197 KB

AD9058 is a dual 8-bit 50 MSPS A/D converter from Analog Devices. It has low input capacitance, high performance and low power.

File format: PDF Size:150 KB

The AD9057 is an 8-bit monolithic analog-to-digital converter optimized for low cost, low power, small size, and ease of use.

File format: PDF Size:170 KB