ANALOG Manuals (Industrial)

The AD9057 is an 8-bit monolithic analog-to-digital converter optimized for low cost, low power, small size, and ease of use. With a 40 MSPS, 60 MSPS, or 80 MSPS encode rates capabil- ity and full-power analog bandwidth of 120 MHz, the component is ideal for applications requiring excellent dynamic performance.

File format: PDF Size:170 KB

The AD9054A is an 8-bit monolithic analog-to-digital converter optimized for high speed, low power, small size and ease of use.

File format: PDF Size:332 KB

The AD9051 is a complete 10-bit monolithic sampling analog- to-digital converter (ADC) with an onboard track-and-hold and reference. The unit is designed for low cost, high performance applications and requires only +5 V and an encode clock to achieve 60 MSPS sample rates with 10-bit resolution. The encode clock is TTL compatible and the digital outputs are CMOS; both 3 V and 5 V logic levels are available.

File format: PDF Size:180 KB

The AD9050 is a complete 10-bit monolithic sampling analog-to-digital converter (ADC) with an onboard track-and-hold and reference. The unit is designed for low cost, high performance applications and requires only +5 V and an encode clock to achieve 40 MSPS or 60 MSPS sample rates with 10-bit resolution. The encode clock is TTL compatible and the digital outputs are CMOS; both can operate with 5 V/3 V logic, selected by the user. The two-step architecture used in the AD9050 is optimized to provide the best dynamic performance available while maintaining low power consumption.

File format: PDF Size:158 KB

AD9049 is a 9-bit, 30 MSPS ADC with low power consumption, single +5 V power supply operation, and selectable 5 V or 3 V logic I/O. It is widely used in digital communications, professional video, medical imaging, and other fields.

File format: PDF Size:303 KB

AD9048 is an 8-bit 35 MSPS video A/D converter from ADI company. It is made on a high speed bipolar process and offers enhancements over its predecessor TDC1048.

File format: PDF Size:114 KB

The AD9042 is a high-speed, high-performance, low-power, monolithic 12-bit analog-to-digital converter.

File format: PDF Size:501 KB

The AME8806/8809/8842 is a family of positive, linear regulators with low quiescent current and low dropout voltage, making them ideal for battery applications. It features thermal shutdown and current fold-back for protection under extreme operating conditions. It is suitable for instrumentation, portable electronics, wireless devices, and more.

File format: PDF Size:93 KB

The ADSP-21xx is a 16-bit fixed-point DSP microprocessor with on-chip memory from Analog Devices, which has an enhanced Harvard architecture for three-bus performance, including instruction bus and dual data buses. The independent computing units include ALU, multiplier / accumulator and shifter, supporting single-cycle instruction execution and multi-function instructions. The on-chip program memory is RAM or ROM and the data memory is RAM. It also integrates serial ports, timers and host interface ports (only for ADSP-2111).

File format: PDF Size:681 KB

File format: PDF Size:559 KB

The AD9012 is a high-speed, high-accuracy, 8-bit ADC

File format: PDF Size:147 KB

The AD9002 is a high-performance 8-bit analog-to-digital converter with a maximum sampling rate of 150MSPS.

File format: PDF Size:640 KB

The AD9002 is an 8-bit, high-speed analog-to-digital converter. It is fabricated in an advanced bipolar process, allowing operation at sampling rates exceeding 150 megasamples/second. The AD9002 consists of 256 parallel comparator stages, whose outputs are decoded to drive ECL compatible output latches. An exceptionally wide large signal analog input bandwidth of 160 MHz is achieved through innovative comparator design and careful attention to device layout considerations.

File format: PDF Size:160 KB

AD9000 is a 6-bit high-speed ADC produced by Analog Devices. The maximum conversion rate can reach 77 MS/s. The device adopts the standard flash converter architecture and integrates 64 independent comparators, which can simultaneously determine the precise analog signal level. AD9000 also has low error rate, low input capacitance and overflow bit, which is suitable for communication, electronic warfare, radar and other fields.

File format: PDF Size:210 KB

This file provides information about AD7225, including functional description and application example. AD7225 is a 4-channel 8-bit voltage output D/A converter with output buffer amplifiers and interface logic, which is compatible with most 8-bit microprocessors.

File format: PDF Size:345 KB

The document describes a LC2MOS 8-bit DAC chip called AD7224, which includes output amplifiers. This chip can be operated with a single or dual power supply, and has a low total unadjusted error of less than 1 LSB over a wide temperature range. The single-chip design and CMOS fabrication result in low power consumption. The chip is available in standard 18-pin DIP, 20-pin surface mount, and SOIC packages.

File format: PDF Size:233 KB

The AD722 is a low cost RGB to NTSC/PAL Encoder that converts red, green and blue color component signals into their corresponding luminance (baseband amplitude) and chromi- nance (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards. These two outputs are also combined to provide composite video output. All three out- puts can simultaneously drive 75 Ω, reverse-terminated cables. All logical inputs are CMOS compatible. The chip operates from a single +5 V supply. No external delay lines or filters are required. The AD722 may be powered down when not in use. The AD722 accepts either FSC or 4FSC clock. When a clock is not available, a low cost parallel-resonant crystal (3.58 MHz (NTSC) or 4.43 MHz (PAL)) and the AD722’s on-chip oscilla- tor generate the necessary subcarrier clock. The AD722 also ac- cepts the subcarrier clock, which can be derived from an external crystal or the chip’s on-chip oscillator.

File format: PDF Size:370 KB

The document describes the features and characteristics of the AD720 and AD721 RGB to NTSC/PAL encoders. It includes functional block diagrams and connection diagrams, explaining the input/output interfaces and operation of the products. The encoders are capable of converting RGB signals to composite video signals, chrominance, and luminance signals that comply with the NTSC and PAL encoding standards. They do not require external filters or delay lines, can drive 75-ohm terminated loads, and have compact packaging and low power consumption.

File format: PDF Size:146 KB

ADV7183 is an advanced video decoder with 10-bit ADC and component input support from Analog Devices, Inc.

File format: PDF Size:502 KB

The AD7151 is an ultra-low power, single-channel capacitance converter for capacitive proximity sensors. AD7151 features fast response time and ultra-low power consumption, and can be used in applications such as proximity sensing, contactless switching, position detection, and water level detection.

File format: PDF Size:385 KB