ANALOG Manuals (Industrial)

This is an ultra low power, 2 channel, capacitance converter for proximity sensing

File format: PDF Size:311 KB

The AD7143 is a programmable capacitance touch sensor controller manufactured by Analog Devices, Inc. It has a 25 ms update rate, 1 fF resolution, 8 capacitance sensor input channels, automatic calibration logic, environmental compensation, adaptive threshold and sensitivity levels, and is suitable for personal music and multimedia players, cell phones, digital cameras, smart handheld devices, televisions, and automobiles.

File format: PDF Size:567 KB

AD7142 is a programmable controller for capacitance touch sensors. It has a 36ms update rate, 1fF resolution, 14 input channels, automatic calibration logic, environmental compensation, and is suitable for handheld devices, digital cameras, etc.

File format: PDF Size:724 KB

AD7142/AD7142-1 is a programmable capacitance-to-digital converter with environmental compensation, which can be used in personal music and multimedia systems.

File format: PDF Size:1132 KB

The AD713 is a quad operational amplifier, consisting of four AD711 BiFET op amps. These precision monolithic op amps offer excellent dc characteristics plus rapid settling times, high slew rates, and ample bandwidths.

File format: PDF Size:651 KB

LOGDAC is a type of digital to analog converter of analog devices. AD7111/AD7111A are two products in the LOGDAC series. They have a wide dynamic range and a small size. AD7111/AD7111A can attenuate analog input signals over the range 0dB to 88.5dB in 0.375dB steps. Both AD7111/AD7111A provide 16-pin DIPs and SOIC packages, and AD7111 also provides 20-terminal LCCC package.

File format: PDF Size:180 KB

File format: PDF Size:0 KB

The AD708 is a high precision, dual monolithic operational amplifier. Each amplifier individually offers excellent dc precision with maximum offset voltage and offset voltage drift of 30 μV and 0.3 μV/°C respectively. The AD708 has a minimum open-loop gain of 5 million V/V, a minimum CMRR of 130 dB and a minimum PSRR of 120 dB.

File format: PDF Size:232 KB

AD708 is a high precision dual monolithic operational amplifier from AD company. Its maximum output offset voltage is 30uV, offset voltage drift is 0.3uV/℃, maximum input offset voltage is 0.35uV p-p, open loop gain is 5V/uV, maximum input voltage is 2.2V, and maximum output voltage is 20V.

File format: PDF Size:412 KB

The AD708 is a dual monolithic operational amplifier from Analog Devices with ultra-high DC precision, minimum input bias current, minimum offset voltage drift and minimum voltage noise.

File format: PDF Size:412 KB

AD7303 is a 8-bit dual channel voltage output DAC from AD company. It works at a supply voltage of +2.7V to +5.5V and uses a three-wire serial interface. AD7303 has built-in 2.5V and 1.25V reference voltages and supports external reference voltage input. AD7303 uses on-chip output buffers, the output voltage range is 0V to VREF, and it can achieve rail-to-rail output. AD7303 has low power consumption characteristics, full power current is 2.3mA, and it is 1uA when turned off. AD7303 is suitable for battery-powered portable instruments, digital gain and offset adjustment, programmable voltage and current sources, and programmable attenuators.

File format: PDF Size:319 KB

The AD707 is a low drift operational amplifier from Analog Devices. It features very high DC precision, low offset voltage, low offset voltage drift and low noise, making it ideal for precision instrumentation applications.

File format: PDF Size:329 KB

AD706 is a dual-channel low-power bipolar op amp that has the low input bias current of a BiFET amplifier, but which offers a significantly lower IB drift over temperature

File format: PDF Size:251 KB

The AD705 is a low power bipolar op amp that has the low input bias current of a BiFET amplifier but which offers a significantly lower IB drift over temperature.

File format: PDF Size:456 KB

The document introduces the characteristics of the AD704 product, including high precision, low offset voltage, low offset voltage drift, low input bias current, low noise and low power consumption.

File format: PDF Size:402 KB

This document introduces the system architecture of the AD20msp410 GSM baseband processing chipset, including the algorithm signal processor, physical layer processor, microcontroller, baseband converter, radio subsystem, ROM, RAM, EEPROM, keyboard, and SIM card.

File format: PDF Size:67 KB

The AD7013 is a complete low power, CMOS, TIA IS-54 baseband receive port with single +5 V power supply. The part is designed to perform the baseband conversion of I and Q waveforms in accordance with the American (TIA IS-54) Digital Cellular Telephone system. The receive path consists of two high performance sigma-delta ADCs, each followed by a FIR digital filter. A primary and auxiliary set of IQ differential analog inputs are provided, where either can be selected as inputs to the sigma-delta ADCs. Also, a choice of two frequency responses are available for the receive FIR filters; a Root-Raised-Cosine filter for digital mode or a brick wall response for analog mode. Differential analog inputs are provided for both I and Q channels. On-chip calibration logic is also provided to remove either on-chip offsets or remove system offsets. A 16-bit serial interface is provided, interfacing easily to most DSPs. The receive path also provides a means to vary the gain of the receive path.

File format: PDF Size:595 KB

The AD7011 is a complete low power CMOS π/4 DQPSK modulator with single +5 V power supply. The part is designed to perform the baseband conversion of I and Q transmit wave- forms in accordance with the American Digital Cellular Tele- phone system (TIA IS-54).

File format: PDF Size:397 KB

The AD7010 is a complete low power, CMOS, π/4 DQPSK modulator with single +5 V power supply. The part is designed to perform the baseband conversion of I and Q transmit waveforms in accordance with the Japanese Digital Cellular Telephone system. The on-chip π/4 Differential Quadrature Phase Shift Keying (DQPSK) digital modulator, which includes the Root Raised Cosine filters, generates I and Q data in response to the transmit data stream. The AD7010 also contains ramp control envelope logic to shape the I and Q output waveforms when ramping up or down at the beginning or end of a transmit burst. Besides providing all the necessary logic to perform π/4 DQPSK modulation, the part also provides reconstruction filters to smooth the DAC outputs, providing continuous time analog outputs. The AD7010 generates differential analog outputs for both the I and Q signals. As it is a necessity for all digital mobile systems to use the lowest possible power, the device is designed in a low power manner.

File format: PDF Size:254 KB

The AD7008 is a CMOS DDS Modulator features a single +5 V supply, 32-Bit Phase Accumulator, On-Chip COSINE and SINE Look-Up Tables, On-Chip 10-Bit DAC, Frequency, Phase and Amplitude Modulation, Parallel and Serial Loading, Software and Hardware Power Down Options, 20 MHz and 50 MHz Speed Grades.

File format: PDF Size:514 KB