Industrial Manuals

This document describes the features and characteristics of the EVALKITST7570-1 ST7570 S-FSK power line networking system-on-chip demonstration kit, including point to multi-point two-way communication over AC mains, embedded turn-key IEC61334-5-1 compliant PHY, MAC and MIB communication layers, multiple configurable operating modes, and flexible architecture.

File format: PDF Size:69 KB

The EVALHVLED805 is a demonstration board equipped with the new HVLED805 PWM current mode LED driver and is designed for European mains.

File format: PDF Size:571 KB

The STEVAL-ILL027V2 is an 18W single-stage offline LED driver based on the L6562A. It operates with an input voltage range of 190VAC to 295VAC and provides constant power to HBLED. It is able to drive 14 to 20 HBLED in series and features soft switching, LED open-circuit protection, LED short-circuit protection, power factor greater than 0.8, and efficiency greater than 87%.

File format: PDF Size:79 KB

This document describes the features and characteristics of the EVL250W-ATX80PL 250 W ATX SMPS demonstration board, including input voltage range, output voltage and current, standby power consumption, protection functions, PCB type and size, as well as safety and EMI certification.

File format: PDF Size:64 KB

This is a 19 V - 65 W power adapter with very high average efficiency and very low no load power consumption.

File format: PDF Size:115 KB

The STEVAL-IHM028V1 is a 2 kW 3-phase motor control demonstration board featuring the IGBT intelligent power module STGIPS20K60. It offers a complete solution and various features.

File format: PDF Size:222 KB

This file is about STEVAL-ISQ002V1 RS232 to PMBus bridge demonstration board.

File format: PDF Size:230 KB

The STEVAL-SPBT2ATV2 is a design tool to evaluate the SPBT2532C2.AT module. It is a Bluetooth V2.1 board with USB connection and SMD antenna. The design board allows for creating a Bluetooth link with simple AT commands.

File format: PDF Size:70 KB

File format: PDF Size:0 KB

The STM3220G-EVAL evaluation board is a complete demonstration and development platform for the STM32 F-2 series and includes an embedded STM32F207IGH6 high-performance ARM Cortex-M3 32-bit microcontroller. The full range of hardware features on the board is provided to help you evaluate all peripherals.

File format: PDF Size:229 KB

The STEVAL-MKI080V1 demonstration board is a MEMS demonstration board based on the LPR410AL analog output 2-axis gyroscope. It features two different working modes: analog (AWM) and digital (DWM). The demonstration board includes a sensing element and an IC interface capable of translating information from the sensing element into a measured signal that can be used for external applications. In addition to the MEMS sensor, the demonstration board uses an ST7 microcontroller which functions as a bridge between the sensor and the PC. This makes it possible to download the graphical user interface (GUI) from the website or to use dedicated software routines for customized applications.

File format: PDF Size:183 KB

The EVAL6520-1421 is a demonstration board able to drive either a 14 W or 21 W linear T5 fluorescent lamp with the L6520 low voltage ballast controller. The half bridge consists of NPN high voltage power transistors driven by a suitable pulse transformer.

File format: PDF Size:1498 KB

This data brief introduces the STEVAL-MKI084V1, an adapter board designed to facilitate the evaluation of the LPY430AL product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application.

File format: PDF Size:85 KB

EVALPM8803-FLY is an IEEE802.3at compliant demonstration kit with synchronous flyback PoE converter

File format: PDF Size:258 KB

This data brief introduces the STEVAL-ISA077V2 demonstration board based on the L6920D high efficiency step-up converter as well as the external components required for a typical application. Startup is guaranteed at 1 V and the device operates down to 0.6 V. The output voltage can be adjusted from 2 V to 5.2 V and two fixed output voltages (3.3 V and 5 V) are also available.

File format: PDF Size:97 KB

This document introduces the design of STEVAL-IPB001V1, a 2 W three-phase switch-mode power supply based on the STC04IE170HP ESBT. The power supply uses the UC3845B PWM driver and the STC04IE170HP ESBT as the main switch. It can be used to supply power to breaker applications and can be easily upgraded to higher output power.

File format: PDF Size:94 KB

This document is about the data brief of STEVAL-ISB002V1, introducing the features and characteristics of the product, including 1% measurement accuracy, upgradable firmware, support for Li-ion batteries or 2-cell NiMH batteries, 5V power supply, RoHS compliance, etc.

File format: PDF Size:116 KB

The STEVAL-CCA009V1 is a high-performance stereo headphone driver demonstration board based on the TS4601B chip. It features a wide power supply range, low quiescent current, and digital volume control.

File format: PDF Size:104 KB

This is a document that introduces the STEVAL-IHM010V1 control board, which can be used to develop motion control applications based on the ST7MCx microcontroller.

File format: PDF Size:138 KB

This data brief introduces the STEVAL-ILL034V1 LED driver based on the L6562A for the USA market. This driver is suitable for A19 lamps and has an input voltage of 96-132 Vac, 60 Hz, non-dimmable, output current of 370 mA and can drive 5 to 12-LED series string(s).

File format: PDF Size:165 KB