Computers Manuals

This document provides a user guide for the internal memory (RAM and ROM) of Altera Corporation, including the features and characteristics of the products.

File format: PDF Size:1293 KB

File format: PDF Size:0 KB

This file introduces the features of Numonyx™ StrataFlash® Cellular Memory (M18) Datasheet, including high-performance read, program and erase, architecture, quality and reliability, power consumption, etc.

File format: PDF Size:2001 KB

Am29LV160B 16 Megabit (2 M x 8-Bit/1 M x 16-Bit) CMOS 3.0 Volt-only Boot Sector Flash Memory This memory supports single power supply operation, full voltage range of 2.7 to 3.6 volts for battery-powered applications.

File format: PDF Size:280 KB

This document contains information on a product under development at Advanced Micro Devices. The product is a 16 Megabit (2 M x 8-Bit) CMOS 3.0 Volt-only Boot Sector Flash Memory. Its distinctive characteristics include single power supply operation, manufactured on 0.35 µm process technology, high performance, ultra low power consumption, and flexible sector architecture.

File format: PDF Size:280 KB

This is a reader/writer for xD-Picture Card™. It supports USB 2.0 interface, and can be connected to a computer via USB without the need to install a driver.

File format: PDF Size:1550 KB

This document is the user manual for the MAUSB-300 USB Read/Write Memory Adapter. It introduces the adapter's usage methods, precautions, compatibility, etc.

File format: PDF Size:503 KB

The MAUSB-500 USB Memory Adapter is designed exclusively for reading and writing data to an xD-Picture Card™. You can transfer large amounts of data to and from the card quickly and easily using a computer equipped with a USB port.

File format: PDF Size:536 KB

File format: PDF Size:1671 KB

Memory Spectrum product information, introducing Infineon's memory product series, including DDR400 Components and DIMMs (PC3200), 2 GB DDR2 Unbuffered DIMM, 4 GB DDR2 Registered DIMM, 16 Mb and 32 Mb CellularRAM, 512 Mb Mobile-RAM“Green**”, DRAM Components and Modules, 512 Mb and 1 Gb TwinNAND Components, SD Cards / MultiMediaCards etc.

File format: PDF Size:1571 KB

This is an iMac G5 memory upgrade instructions manual, which describes the memory type and installation method

File format: PDF Size:1648 KB

Am29LV320MT/B is a 32 Megabit (2 M x 16-Bit/4 M x 8-Bit) MirrorBit 3.0 Volt-only Boot Sector Flash Memory, featuring single power supply operation, SecSi (Secured Silicon) Sector region with permanent, secure identification, flexible sector architecture, and compatibility with JEDEC standards.

File format: PDF Size:1396 KB

The AT49F1024 and AT49F1025 are 5-volt-only in-system Flash memories. Their 1 megabit of memory is organized as 65,536 words by 16 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the devices offer access times to 35 ns with power dissipation of just 275 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 µA. The only difference between the AT49F1024 and the AT49F1025 is the package. To allow for simple in-system reprogrammability, the AT49F1024/1025 does not require high-input voltages for programming. Five-volt-only commands determine the read/write operations.

File format: PDF Size:265 KB

The Intel® Advanced+ Boot Block Flash Memory (C3) is a feature-rich solution for low-power applications, manufactured on Intel's latest 0.13µm and 0.18µm technologies. The C3 device incorporates low-voltage capability (3V read, program, and erase) with high-speed, low-power operation. Flexible block locking allows any block to be independently locked or unlocked. The Intel® Flash Data Integrator (FDI) software provides a cost-effective, flexible, monolithic code plus data storage solution.

File format: PDF Size:1128 KB

Intel StrataFlash Memory (J3) 256-Mbit (x8/x16) Datasheet datasheet introduces the features and characteristics of Intel StrataFlash Memory (J3) 256-Mbit (x8/x16) product

File format: PDF Size:552 KB

File format: PDF Size:0 KB

This document describes ValueRAM's 512M x 72-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), registered w / parity, 2Rx8, ECC memory module, based on eighteen 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V.This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

File format: PDF Size:151 KB

KVR1333D3N9K2/4G 4GB (2GB 2Rx8 256M x 64-Bit x 2 pcs.) PC3-10600 CL9 240-Pin DIMM Kit is a memory module from ValueRAM that uses JEDEC standard 1.5V power supply and supports DDR3-1333 timing. It has 8 independent internal banks.

File format: PDF Size:238 KB

KHX2133C10D3W1K2/4GX 4GB (2GB 256M x 64-Bit x 2 pcs.) DDR3-2133 CL10 240-Pin DIMM Kit is a Kingston 4GB DDR3-2133 memory that supports Intel® XMP (Extreme Memory Profiles) and JEDEC standard low latency DDR3-1333 timing 9-9-9 1.5V.

File format: PDF Size:250 KB

This document describes ValueRAM's 512M x 72-bit (4GB) DDR3L-1333 CL9 SDRAM (Synchronous DRAM), low voltage, Intel® compatibility tested, registered w/parity, 1Rx4 ECC memory module, based on eighteen 512M x 4-bit DDR3L-1333 FBGA components. The SPD is programmed to JEDEC stan- dard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

File format: PDF Size:152 KB