Key facts
- Brand
- Pentair
- Model
- TR 60
- Category
- Other
- Industry
- Appliances
- Documents
- 4
- Languages
- EN
- Last added
- 2023-10-20
Start here

Pentair Triton® Fiberglass Sand Filter Installation and User’s Guide
This manual provides step-by-step instructions for installing and operating Pentair Triton® fiberglass sand filters, including safety precautions, setup procedures, and maintenance tips. It covers multiple models including TR 40, TR 50, TR 60, TR 100, TR 140, TR 100HD, TR 100C, TR 140C, TR 100C-3, TR 140C-3, and TR 60 with CLEARPRO TECHNOLOGY™. Safety warnings are emphasized throughout to prevent injury during installation or maintenance.
Read onlinePentair TR 60 specifications
| Maximum Operating Pressure (Triton C/C-3) | 50 psi |
|---|---|
| Maximum Operating Pressure (Triton HD) | 75 psi |
| Filtration Rate (Commercial) | up to 20 GPM/Sq. Ft. |
| Drain Size (Triton C/C-3) | 2 in. |
| Sand Bed Access Opening (Triton C/C-3) | 8 in. |
| Flange Connection (Triton C-3) | 3 in. |
Source: Pentair Triton Fiberglass Sand Filter Installation and User's Guide
All Pentair TR 60 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What is the maximum operating pressure for Triton® C and C-3 models?
The maximum operating pressure is 50 psi.
From: Pentair Triton® Fiberglass Sand Filter Installation and User’s Guide
What is the maximum operating pressure for Triton® HD models?
The maximum operating pressure is 75 psi.
From: Pentair Triton® Fiberglass Sand Filter Installation and User’s Guide
What is the maximum operating pressure for Triton C and C-3 models?
Maximum Operating Pressure 50 psi.
What is the maximum operating pressure for Triton HD models?
Maximum Operating Pressure 75 psi.
Who should install this filter?
This filter must be installed by a licensed or certified electrician or a qualified pool serviceman.
From: Pentair Triton Fiberglass Sand Filter Installation and User's Guide
What safety precaution is needed before servicing the filter?
Always disconnect power to the pool circulating system at the circuit breaker before servicing the filter.
From: Pentair Triton Fiberglass Sand Filter Installation and User's Guide
