Key facts
- Brand
- Hayward
- Model
- S200
- Category
- Other
- Industry
- Appliances
- Documents
- 2
- Languages
- EN
- Last added
- 2012-08-06
Start here
Hayward S200 High-Rate Sand Filter Installation and Operation Manual
The Hayward S200 is a high-performance, corrosion-proof high-rate sand filter designed to produce clear, sparkling pool water with minimal attention. It utilizes a patented control valve to automatically direct water through the filter sand, trapping dirt particles and returning clean water to the pool. The system is virtually foolproof in design and operation when maintained according to the provided instructions.
Read onlineHayward S200 specifications
| Output Rating | 1400 gallons (5299 L) per hour |
|---|---|
| Filter Material | Reusable single element, reinforced polyester |
| Pump Type | Non-corrosive centrifugal pump |
| Pipe Connections | 1-1/2" N.P.T. |
Source: Hayward IS2001540LS-99 Micro Star-Clear Owner's Guide
All Hayward S200 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
When is it time to backwash the filter?
Backwash when the pressure gauge reading is 6-8 PSI higher than the initial clean pressure.
From: Hayward S200 High-Rate Sand Filter Installation and Operation Manual
What type of sand is required for the S200?
The filter requires 0.45-0.55 mm silica sand (also known as No. 20 or No. 1/2 Silica Sand).
From: Hayward S200 High-Rate Sand Filter Installation and Operation Manual
Where should the Micro Star-Clear system be installed?
The system is designed for installation below the swimming pool water line and as close to the pool as possible.
How often should the chlorine level be checked?
The chlorine level should be checked at least once a day using a suitable test kit.