Key facts
- Brand
- FlowLine
- Model
- LI25 Series
- Category
- Other Electronics
- Industry
- Industrial
- Documents
- 3
- Languages
- EN
- Last added
- 2023-10-12
Start here
Flowline LI25 Series Loop-Powered Meters Instruction Manual
The Flowline LI25 Series Loop-Powered Meters are intrinsically safe and non-incendive devices approved for hazardous area locations, as well as general-purpose meters for safe areas. These meters feature a 5-digit LCD display, a 20-segment bargraph, and support engineering units, maximum/minimum display, and trend arrows. They utilize four front panel buttons for easy setup and programming, including functions for scaling, calibration, and math operations like square root and programmable exponents.
Read onlineFlowline LI25 Series specifications
| Display | Five digits 0.60" (15.2 mm) high, 7-segment |
|---|---|
| Bargraph | 20-segment, 0% to 100% indication |
| Update Rate | 2.5/second |
| Operating Temperature | -30 to 65°C (-40°C allowed) |
| Input Accuracy | +0.03% of span +1 count |
| Voltage Drop | 2.0 V maximum (without backlight) |
Source: Flowline LI25 Series Loop-Powered Meters Instruction Manual
All Flowline LI25 Series documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
Is the LI25 Series approved for hazardous areas?
Yes, the LI25-2001 model is intrinsically safe and non-incendive and approved for hazardous area locations.
From: Flowline LI25 Series Loop-Powered Meters Instruction Manual
How often should the meter be recalibrated?
Recalibration is recommended at least every 12 months.
From: Flowline LI25 Series Loop-Powered Meters Instruction Manual
Is the LI25 Series approved for hazardous areas?
Yes, the LI25-2001 model is an intrinsically safe and non-incendive loop-powered meter approved for hazardous area locations.
From: Flowline LI25 Series Loop-Powered Meters Instruction Manual
How often should the meter be recalibrated?
Recalibration is recommended at least every 12 months.
From: Flowline LI25 Series Loop-Powered Meters Instruction Manual
How often is recalibration recommended?
Recalibration is recommended at least every 12 months.
From: Flowline LI25 Series Loop-Powered Meters Instruction Manual
What happens if the input signals are too close together?
An Error message will appear on the display.
From: Flowline LI25 Series Loop-Powered Meters Instruction Manual