Key facts
Start here

Dell Latitude 7400 2-in-1 Setup and Specifications Guide
This guide explains how to set up the Dell Latitude 7400 2-in-1, create a Windows USB recovery drive, and use its chassis views, keyboard shortcuts, system specifications, BIOS setup options, software, and support resources.
It also documents the laptop's ports and connectors, optional features such as NFC and a fingerprint reader, proximity-sensor behavior for Dell ExpressSign-in, and regulatory model P110G. This manual is written in Portuguese.
Dell Latitude 7400 2-in-1 specifications
| Recovery USB minimum capacity | 16 GB |
|---|---|
| HDMI port | HDMI 1.4 |
| Left USB Type-C ports | 2 x USB 3.1 Gen2 Type-C with Thunderbolt 3 and Power Delivery |
| Universal audio port | 3.5 mm |
| Memory card reader | microSD |
| NFC | Optional on touchpad |
| Fingerprint reader | Optional in power button |
| Proximity sensor recommended distance | 70 cm |
| Proximity sensor detection distance | Less than 100 cm |
| Proximity sensor range angle | 27-degree cone |
| ExpressSign-in lock timer | 60, 90, or 120 seconds |
| Supported hinge angle, opening mode | 60 to 150 degrees |
| Supported hinge angle, stand mode | 210 to 300 degrees |
Source: Dell Latitude 7400 2-in-1 Setup and Specifications Guide
All Dell Latitude 7400 2-in-1 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What is the minimum capacity for a USB recovery drive?
A USB flash drive with a minimum capacity of 16 GB is required.
From: Dell Latitude 7400 2-in-1 Setup and Specifications Guide
What distance does Dell recommend for the proximity sensor?
Dell recommends 70 cm between the user and the laptop screen.
From: Dell Latitude 7400 2-in-1 Setup and Specifications Guide
Who is this reimaging guide intended for?
System administrators.
From: Dell Latitude 7400 2-in-1 Re-imaging Guide for Microsoft Windows
Which Windows version is validated for this computer?
The 64-bit Microsoft Windows 10 operating system.
From: Dell Latitude 7400 2-in-1 Re-imaging Guide for Microsoft Windows
What should I do before working inside the computer?
Follow the safety instructions, use a flat clean work surface, turn off the computer, disconnect network cables, disconnect power, and press and hold the power button while unplugged to ground the system board.
How do I turn off the computer in Windows 10?
Save and close all open files, exit all open programs, then click or tap Start, click or tap Power, and click or tap Shut down.
