Key facts
Start here

Dell SE2417HG/SE2417HGR Monitor User Guide
This guide covers everything you need to know about the Dell SE2417HG/SE2417HGR flat‑panel monitor, including unpacking, installation, cable management, and how to use the front‑panel controls and OSD menu. It also explains the monitor’s plug‑and‑play capabilities, safety information, and regulatory compliance.
Technical specifications such as screen size, resolution, panel type, brightness, contrast, response time, and power consumption are listed, along with detailed pin‑out diagrams for the VGA and HDMI connectors. The manual finishes with troubleshooting steps, self‑test procedures, and contact information for Dell support. This manual is written in Chinese.
Dell E2417H specifications
| Screen size | 23.6 inches (59.9 cm) |
|---|---|
| Resolution | 1920 × 1080 @ 60 Hz |
| Panel type | TN |
| Brightness | 300 cd/m² (typical) |
| Contrast ratio | 1000:1 (typical) |
| Dynamic contrast ratio | 8,000,000:1 |
| Response time | 2 ms (G‑to‑G) |
| Typical power consumption | 17 W |
All Dell E2417H documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the native resolution of the monitor?
The monitor’s native resolution is 1920 × 1080.
How much power does the monitor use in sleep mode?
In sleep mode the monitor consumes 0.3 W.
How can I run the built‑in diagnostic test?
Keep the screen clean, disconnect the video cable, then press and hold button 1 for about 5 seconds to start the self‑test; follow the on‑screen prompts to check each color.
What should I check if there is no video signal and the power LED is off?
Verify that the video and power cables are securely connected, confirm the outlet is working, press the power button fully, and select the correct input source from the OSD menu.
What is the maximum resolution of the monitor?
The maximum resolution is up to 1920 x 1080 via VGA and DisplayPort.
How do I reset the monitor to factory settings?
You can reset the monitor to factory settings by performing a factory reset through the OSD menu.
