VIDEX ESVK/6788 Series 2-Wire Bus Videokit Installation Handbook

Installation handbook for VIDEX ESVK/6788 Series 2-wire bus video intercom kits covering components, wiring, cable specifications, and setup for one-way and…


VIDEX ESVK/6788 Series 2-Wire Bus Videokit Installation Handbook - cover page
Brand
Videx
Category
Interphone
Document type
Installation Guide
Language
English
Pages
40
File format
PDF
File size
11 MB
Published
13 November, 2026
Updated
13 November, 2026
MD5 checksum
2709CCE80283E36482F513FB8560069D

About this manual

The VIDEX ESVK/6788 Series comprises 2-wire bus video intercom kits available in one-way and two-way versions, with flush or surface mounting options. Kits include a camera unit (Art. 4333 or 4333X with proximity reader), 7-inch hands-free colour videophones (Art. 6788), power supply (Art. 2321), and optional codelock module (Art. 4800M) for the ESVKC variant.

The handbook provides general installation directions, cable type and length specifications, bus device setup procedures, wiring diagrams for various configurations, DIP-switch address tables, and mounting instructions for door stations and videophones. It specifies maximum cable distances up to 250 metres depending on cable type, with capacitance not exceeding 40 nF and resistance below 10 Ohms.

What's inside

  • System components and available versions
  • General directions for installation
  • Speaker unit module (Art. 4333/4333X)
  • Digital codelock module (Art. 4800/4800M)
  • 4000 Series door station installation
  • Videophone Art. 6788 installation
  • Power supplies (Art. 2321, 2322)
  • Call expansion module (Art. 125)
  • Installation diagrams
  • DIP-switch address tables

Specifications

Maximum distance (VIDEX CM2 cable)250 m (outdoor to farthest indoor), 100 m (power supply to farthest indoor)
Maximum distance (CAT5 UTP/CW1308)100 m (outdoor to farthest indoor), 50 m (power supply to farthest indoor)
Maximum distance (Standard Telephone Cable 0.28 mm²)150 m (outdoor to farthest indoor), 50 m (power supply to farthest indoor)
Maximum distance (Standard wire 0.5 mm²)70 m (outdoor to farthest indoor), 30 m (power supply to farthest indoor)
Maximum cable capacitance40 nF total (all lengths and branches)
Maximum cable resistance10 Ohms (between furthest door station and furthest videophone)
Power supplyArt. 2321 for VX2300
Power supply converterArt. 2322 from BUS line to 12 Vdc

Frequently asked questions

What cable types are recommended for the ESVK/6788 2-wire video kit?

Recommended cables include VIDEX CM2 (0.50 mm²), CAT5 UTP/CW1308 (0.22 mm²), standard telephone cable (0.28 mm²), and standard wire (0.5 mm²). Shielded cables are not recommended due to high eddy capacitance.

What is the maximum cable distance for VIDEX CM2 cable?

The maximum distance between the outdoor unit and the farthest indoor unit is 250 metres, and between the power supply and the farthest indoor unit is 100 metres when using VIDEX CM2 cable.

What should be done after changing DIP-switch settings on a videophone?

The videophone must be disconnected from the connection board for a few seconds and then reconnected to allow recognition of the new setting.

How should a local power supply be connected when required?

Connect a local power supply (Art. 323/12) with switch 4 of SW3 set to ON position, observing connection polarities as shown in the diagram.

Download PDF (11 MB)

More Videx Manuals


View all Videx manuals →