User manual for the Universal Robots UR5 robot arm and CB3 control box, covering safety, installation, electrical interfaces, and PolyScope programming.
Version 3.6.0 of the Universal Robots UR5/CB3 user manual, translated from the original instructions. The document is divided into a hardware installation manual and a PolyScope manual, and covers safety, safety-related functions and interfaces, transportation, mechanical and electrical interfaces, maintenance and repair, disposal and environment, certifications, warranty, and technical specifications.
The PolyScope part covers safety configuration, getting started with programming, the screen editor, robot control, programming commands, and the settings screen. The technical specifications list the UR5 as a robot with 6 rotating joints, a 5 kg payload, and an 850 mm reach; the CB3 control box provides 16 digital inputs, 16 digital outputs, 2 analog inputs, and 2 analog outputs. This manual is written in Chinese.
| Weight | 18.4 kg (40.6 lb) |
|---|---|
| Maximum payload | 5 kg (11 lb) |
| Reach | 850 mm (33.5 in) |
| Speed | Joints: max 180°/s; tool: approx. 1 m/s (39.4 in/s) |
| Repeatability | ±0.1 mm (0.0039 in, 4 mils) |
| Degrees of freedom | 6 rotating joints |
| Control box I/O ports | 16 digital inputs, 16 digital outputs, 2 analog inputs, 2 analog outputs |
| Tool I/O ports | 2 digital inputs, 2 digital outputs, 2 analog inputs |
| Communication | TCP/IP 100 Mbit (IEEE 802.3u, 100BASE-TX); Modbus TCP, Ethernet/IP adapter, Profinet |
| Programming | PolyScope graphical user interface on a 12-inch touchscreen |
| Noise | 72 dB(A) |
| IP rating | IP54 |
| Power consumption | Approx. 200 W during typical program operation |
| Power supply | 100–240 VAC, 50–60 Hz |
| Materials | Aluminum, PP plastic |
The UR5 has a maximum payload of 5 kg (11 lb).
The robot weighs 18.4 kg (40.6 lb).
Programming is done through the PolyScope graphical user interface on a 12-inch touchscreen.
Software updates can be installed from a USB flash drive by selecting a file, clicking Update, and following the on-screen instructions.