The Panasonic ADL944PZGVC2 electronic bidet seat installation guide provides step‑by‑step instructions, safety precautions, and part lists for proper setup.
This guide covers all safety precautions that must be observed before installing the ADL944PZGVC2 bidet seat, including proper use of the supplied power cord, water connections, and required tools. It also lists all components and accessories supplied with the product, such as the split‑flow inlet hose, O‑rings, and quick‑lock fasteners.
Detailed installation steps are provided for mounting the seat, connecting the inlet hose to the split‑flow valve, and securing the unit to the toilet. After installation, a trial run procedure verifies water flow, leak detection, and heating functions, followed by troubleshooting tips for common issues such as leakage or fault indicator lights. This manual is written in Chinese.
| Water pressure range | 0.049 MPa (flow) – 0.735 MPa (static) |
|---|---|
| Power supply | 10 A, 220 V AC |
| Inlet hose length | 650 mm |
Read the safety section, use only the supplied parts, avoid damaging power cords or water connections, and follow local wiring regulations.
Immediately unplug the power plug and contact after‑sales service for assistance.
Insert the supplied inlet hose with its O‑ring into the connection port, then fully engage the quick‑lock fastener until it clicks.
The unit operates with water pressure between 0.049 MPa (flow) and 0.735 MPa (static).