User manual for the ON Semiconductor SECO-RANGEFINDER-GEVK SiPM dToF LiDAR development kit, covering setup, GUI operation and specifications.
The SECO-RANGEFINDER-GEVK is a complete development kit for single-point range-finding applications, described in this ON Semiconductor user manual. It is based on the RB-series NIR-enhanced SiPM and integrates laser and reference circuits, a receiving circuit, power management systems, FPGA and UART communication.
The manual provides practical guidelines for using the dToF platform and describes the board's overall functionality. It covers safety and evaluation board information, specifications, system overview, the PC GUI application, optical components, Bluetooth Development Kit interfacing, hardware test points and collateral.
| Minimum Distance | 0.11 m |
|---|---|
| Maximum Distance | 23 m |
| Laser Diode Type | SPL PL 90_3 (905 nm/75 W peak radial laser diode) |
| Optical Pulse Width | 18 ns |
| Laser Repetition Rate | 1042 Hz |
| TDC Bin Width | ~85 ps |
| Number of FPGA Bins | >1800 |
| Horizontal Beam Divergence | 2.26 ° |
| Vertical Beam Divergence | 0.74 ° |
| Band Pass Optical Filter CWL | 905 ±5 nm |
| Laser Output Current Limit | 42 mA |
| USB Supply Voltage | 5 V |
| PMOD Supply Voltage | 3.3 V |
It is a complete development kit for single-point range-finding applications, based on the RB-series NIR-enhanced SiPM.
The document lists a target distance of > 0.11 m to 23 m.
It uses a single power supply, either from USB at 5 V or from the PMOD connector at 3.3 V.
Yes. The kit is delivered preprogrammed with a USB cable, enabling plug and play functionality.