Mircom FHS-340 Series wall horn/strobes: selectable candela settings, 33 DIP-switch sound settings, 12/24 VDC, UL listed, with universal mounting plate.
This Mircom catalog sheet (CAT. 5269S Rev. 1) describes the FHS-340 Series wall horn/strobe. A single device offers a wide range of light intensity values: 15, 35 or 60 (75 on axis) candela at 12 or 24 VDC, and 75, 95 or 110 candela at 24 VDC. The selected value appears on a front viewer and is set with a rotary selector. Sound configuration covers Temporal, Non-Temporal, "March Time" and Bell patterns, with low, medium or high volume for each pattern and tone; tones include 2400 Hz, Electromechanical, "Broadband" and Bell. Power can be regulated or full-wave rectified 12 or 24 VDC with an 8-33 VDC operating range, and strobes can be synchronized with a Mircom (Amseco) sync protocol panel or the SDM-240 sync module.
The series uses a universal mounting plate for single and double rectangular, octagonal and 4-inch square electrical boxes; the installer mounts the base, makes connections and tests wiring, then hinges the horn/strobe from the top and secures it with a single screw. The sheet lists UL and C-UL listings, strobe and horn current tables, dBA ratings, DIP switch settings, dimensions and ordering information for the red FHS-340R and white FHS-340W models. This manual is written in Spanish.
| Candela settings at 12 VDC | 15, 35 or 60 cd |
|---|---|
| Candela settings at 24 VDC | 15, 35, 60, 75, 95 or 110 cd |
| Operating voltage range | 8-33 VDC |
| Power supply | Regulated or full-wave rectified 12 or 24 VDC |
| Flash frequency | 60 flashes per minute |
| Operating temperature (indoor model) | 32°F to 120°F (0°C to 49°C) |
| Configurable sound settings | 33 settings via DIP switch |
| Volume levels | Low, Medium, High |
| Listings | UL1638, UL1971, UL464, CAN-ULC S526 |
| Synchronization module | SDM-240 |
At 12 VDC the choices are 15, 35 or 60 cd, and at 24 VDC they are 15, 35, 60, 75, 95 or 110 cd, set with a rotary selector and shown on the front viewer.
It operates from 8 to 33 VDC and can be powered by regulated or full-wave rectified 12 or 24 VDC.
They can be synchronized with a panel using the Mircom (Amseco) synchronization protocol or with the SDM-240 synchronization module.
The FHS-340R is the red wall horn/strobe and the FHS-340W is the white wall horn/strobe.