User manual for the Micsig DP750 high voltage differential probe covering specifications, operation, precautions, warranty, and safety.
The Micsig DP750 is a high voltage differential probe with a built-in shielded test line and compact interface box. It provides a maximum 100 MHz bandwidth, a maximum input voltage of 750 V, switchable 50X/500X attenuation, one-press zero calibration, and an overvoltage alarm.
The manual covers the probe's specifications, panel description, operation steps, precautions, warranty, and safety. Applications listed in the text include research and development, commissioning, or maintenance of switching power supplies, frequency converters, electronic ballasts, frequency conversion home appliances, and other electrical power devices.
| Bandwidth | 100 MHz (DP750-100); 50 MHz (DP750-50) |
|---|---|
| Rise Time | ≤ 3.5 ns (DP750-100); ≤ 7 ns (DP750-50) |
| Attenuation Ratio | 50X; 500X |
| Gain Accuracy | ±2% |
| Max Differential Test Voltage (DC+AC PK) | 50X: 75 V; 500X: 750 V |
| Max Common Mode Input Voltage | CAT II 600 V |
| Input Referred Noise | ≤ 12 mVrms (50X); ≤ 120 mVrms (500X) |
| Common Mode Rejection Ratio (CMRR) | > 80 dB (DC); > 80 dB (100 kHz); > 60 dB (1 MHz) |
| Differential Input Impedance | 8 MΩ || 1.25 pF |
| Output Voltage | ≤ 1.5 V |
| Power Rate | 1 W |
| Power Supply | Micsig UPI Interface; USB (Adaptor) |
| Dimensions | Power Supply Box: 80*37*22 mm; Signal In/Output Box: 49*25*12.5 mm |
| Working Humidity | 10%-85% |
Short-circuit the two input terminals, power on, press and hold the Zero button for 3 seconds; the two indicators flash and calibration succeeds after 3 seconds.
The oscilloscope bandwidth must be no less than 100 MHz.
Connect the probe to power adapter PA05, connect it to the oscilloscope input channel, then connect the Type-C cable to a 5V DC supply.
The main body is guaranteed for 1 year under normal use.