Micsig TO series tablet oscilloscopes offer 2 or 4 channels, up to 300 MHz bandwidth, 2 GSa/s sampling, 220 Mpts memory and a 10.1-inch touchscreen.
The Micsig TO series is a portable tablet oscilloscope with a 10.1-inch touchscreen, 2 or 4 analog channels, up to 300 MHz bandwidth, up to 2 GSa/s sample rate and up to 220 Mpts memory depth. It uses an Android-based operating system, has 32 GB of internal storage and includes a 7,500 mAh lithium-ion battery that provides more than five hours of operation.
The data sheet covers the TO3004, TO3002, TO2004, TO2002 and TO1004 models. It describes the touchscreen interface, deep memory, segmented storage, trigger types, serial bus decoding for UART, CAN, CAN FD, LIN, SPI and I²C, automatic measurements, Wi-Fi/USB/HDMI connectivity, specifications and standard accessories. This manual is written in Chinese.
| Maximum bandwidth | 300 MHz |
|---|---|
| Maximum sample rate | 2 GSa/s |
| Maximum memory depth | 220 Mpts |
| Display | 10.1-inch touchscreen, 1280×800 resolution |
| Input impedance | 1 MΩ/50 Ω switchable |
| Battery | 7.4 V, 7500 mAh lithium-ion |
| Internal storage | 32 GB |
| Vertical resolution | 8 bit |
| Time base accuracy | 20 ppm |
| Waveform refresh rate | Up to 300,000 wfms/s |
| Serial bus decoding | RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C |
| Dimensions | 265 × 192 × 50 mm |
| Weight | 1.9 kg including battery |
| Operating temperature | 0 °C to 45 °C |
| Power adapter input | 100–240 V AC, 50/60 Hz |
The TO series has a maximum bandwidth of 300 MHz.
The built-in 7,500 mAh lithium-ion battery provides more than five hours of operation.
It supports RS-232/422/485/UART, CAN, CAN FD, LIN, SPI and I²C decoding.
The TO series uses an Android-based operating system.