User manual for K-4000CK LED controller with 32-65536 gray control, 4 outputs, SD card support, and chip locking.
This manual describes the K-4000CK LED controller, which supports 32 to 65536 gray control and gamma correction. It has four output ports, each supporting up to 1024 lights, and can play content from an SD card (128MB–32GB). The controller supports cascading up to 150 meters with optical isolation and can be configured for various LED chips like UCS1903, TM1803, and WS2812. It includes built-in test effects and can be used standalone or in multi-controller setups.
The manual covers chip compatibility, wiring diagrams, speed settings, SD card formatting, and troubleshooting for common issues such as SD card errors, no effect output, or incorrect chip selection. This manual is written in Chinese.
| Gray Control Range | 32 to 65536 |
|---|---|
| Output Ports | 4 |
| SD Card Capacity | 128MB–32GB |
| Cascading Distance | 150 meters |
| Power Supply | DC5V or DC12-24V |
| Weight | 0.85Kg |
It supports chips like UCS1903, TM1803, WS2812, SM16703, INK1003, LX3203, GS8205, SK6812, and others listed in the manual.
Format the SD card as FAT or FAT32 before copying files. The card cannot be hot-swappable; power must be disconnected before inserting or removing it.
Check if the signal lines are connected correctly, confirm the controller is connected to the first lamp’s input, and verify the chip model matches the actual LEDs.