JENCO ELECTRONICS MODEL 6010 pH/ORP/Temp Tester User Manual

User manual for the JENCO ELECTRONICS MODEL 6010 pH/ORP/Temp Tester, covering operation, calibration, maintenance, and specifications.


JENCO ELECTRONICS MODEL 6010 pH/ORP/Temp Tester User Manual - cover page
Brand
MODEL
Category
Other Electronics
Document type
User Manual
Language
Chinese
Pages
21
File format
PDF
File size
66 KB
Published
02 October, 2011
Updated
16 October, 2026
MD5 checksum
B6E673381EB3EA33D5D35BD4A0853D96

About this manual

The JENCO ELECTRONICS MODEL 6010 is a precision instrument designed to measure pH, ORP, and temperature. It features an internal microprocessor for data storage and calibration of pH electrode characteristics, calibration solutions, and electrode slope. The device includes a waterproof cover to prevent damage from accidental drops into non-corrosive liquids, a mechanical keypad for high reliability, and a single 9V battery with a lifespan of approximately 1000 hours. Calibration data is stored in EEPROM, eliminating the need for recalibration upon the next use. The large LCD simultaneously displays pH (mV), temperature, and the current display mode. This manual is written in Chinese.

What's inside

  • Product Inspection
  • Waterproof Cover
  • Battery Replacement
  • Operation
  • Calibration Solution Selection
  • pH Calibration
  • Temperature Measurement
  • mV Measurement
  • Error Display and Causes
  • Specifications

Specifications

pH Range-2.00 to 16.00 pH
pH Resolution0.01 pH
mV Range-2000 to 1250 mV
Temperature Range-10.0 to 120 °C

Frequently asked questions

What are the two sets of calibration solutions supported?

The device supports two sets: 7.00, 4.01, 10.01 pH or 6.86, 4.00, 9.18 pH.

What does the 'Er 1' error indicate?

It indicates that the pH electrode offset voltage is greater than or less than +/-1.5 pH.

What does the 'Er 2' error indicate?

It indicates that the pH electrode slope exceeds the ideal slope value by 30%.

What does the 'Er 3' error indicate?

It indicates that the calibration solution temperature is outside the range of 0 to 60 °C.

Download PDF (66 KB)

More MODEL Manuals


View all MODEL manuals →