Installation and operating instructions for the Grundfos SCALA1 water pump, covering models 3-25, 3-35, 3-45, 5-25 and 5-55.
This document is the Grundfos instructions sheet for the SCALA1 pump, covering the models SCALA1 3-25, 3-35, 3-45, 5-25 and 5-55. It is largely pictorial and shows the installation steps, mounting dimensions, pipe connections and electrical settings for the pump.
The instructions state the maximum suction lift (8 m / 26 ft), the maximum system pressure for PN8 (8 bar / 0.8 MPa), the ambient temperature range (0 °C to +45 °C) and the per-model pressure and suction-lift limits. It also covers the on/off and stop functions, external control via +24 V EXT, and the available Rp and NPT connection kits, with part numbers 99725165 and 99725168.
| Max. suction lift | 8 m / 26 ft |
|---|---|
| Max. system pressure (PN8) | 8 bar / 0.8 MPa |
| Ambient temperature | 0 °C to +45 °C (32 °F to +113 °F) |
| Max. pressure, SCALA1 3-25 and 5-25 | 5 bar / 72.5 PSI / 0.5 MPa |
| Max. pressure, SCALA1 3-35 | 4 bar / 58 PSI / 0.4 MPa |
| Max. pressure, SCALA1 3-45 | 3 bar / 43.5 PSI / 0.3 MPa |
| Max. pressure, SCALA1 5-55 | 2 bar / 29 PSI / 0.2 MPa |
| Max. suction lift, SCALA1 5-55 | 25 m / 82 ft |
The maximum suction lift is 8 m (26 ft).
The stated ambient temperature range is 0 °C to +45 °C (32 °F to +113 °F).
For PN8 the maximum system pressure is 8 bar (0.8 MPa); lower limits apply per model, e.g. 5 bar for SCALA1 3-25 and 5-25.
An Rp connection kit (PN: 99725165) and an NPT connection kit (PN: 99725168) are listed.