Dallas Semiconductor DS1350W is a 3.3V 4096k nonvolatile SRAM with battery monitor, 100ns access time and at least 10 years of data retention.
The DS1350W from Dallas Semiconductor is a 4,194,304-bit, fully static nonvolatile SRAM organized as 524,288 words by eight bits. It monitors VCC for out-of-tolerance conditions, switches to a self-contained lithium energy source, and provides dedicated monitoring of VCC and the internal lithium battery.
The device is supplied in a 34-pin PowerCap Module package and is normally paired with a DS9034PC PowerCap, which is ordered separately. The module can be used in place of 512k x 8 SRAM, EEPROM or Flash components and supports read, write, data retention, power monitoring, battery monitoring and freshness seal operation.
| Memory organization | 524,288 words × 8 bits |
|---|---|
| Memory capacity | 4,194,304 bits |
| Supply voltage | 3.0V to 3.6V (3.3V typical) |
| Access time | 100 ns |
| Standby current | 50 µA typical |
| Operating current | 50 mA |
| Data retention | 10 years minimum |
| Write cycle endurance | Unlimited write cycles |
| Operating temperature | 0°C to +70°C commercial; -40°C to +85°C industrial |
| Package | 34-pin PowerCap Module (PCM) |
| Write protection voltage | 2.8V to 3.0V |
| Battery warning trip point | 2.6V |
The DS1350W has a minimum data retention time of 10 years in the absence of external power.
It performs battery voltage monitoring every 24 hours, connecting the battery to an internal 1 MΩ test resistor for 1 second.
It uses a 34-pin PowerCap Module and is normally paired with a DS9034PC PowerCap, which is ordered separately.
Yes, the DS1350W can be used in place of 512k x 8 SRAM, EEPROM or Flash components.