Celduc PXS79 coded magnetic safety switches for machine protection, with UL/cULus certification and Cat. 4/PL=e/SIL 3 capability.
The Celduc PXS79 is a coded magnetic switch (safety sensor) designed for machine protection and reliability. It is available in versions with or without an LED and serial resistance, with 2 m, 5 m, or 10 m cables or an M8 connector.
With an appropriate monitoring system and correct wiring, it can reach Cat. 4 / PL=e per EN/ISO 13849-1 and SIL 3 per IEC 61508. The leaflet lists rated electrical characteristics, mounting clearances, cable connection procedures, and ordering references. This manual is written in French.
| Standards | IEC 60947-5-1, EN/ISO 12100, EN 60204, EN 1088 / EN ISO 14119 |
|---|---|
| Certifications | UL/cULus |
| Ambient air temperature (operation) | -25 to 85 °C (-13 to 185 °F) |
| Ambient air temperature (storage) | -40 to 85 °C (-40 to 185 °F) |
| Rated operating characteristics | With LED/10 Ω: 24 V DC, 100 mA; without LED/0 Ω: 24 V DC, 400 mA |
| Required fuse | 500 mA gG (gl) cartridge fuse |
| Operating cycle frequency | 150 Hz |
| B10d | 20 million cycles at 24 V DC, 10 mA |
| Drop-out voltage | 0.1 V DC without LED at 10 mA; 2.4 V DC with LED and 10 Ω at 10 mA; 1 V DC without LED at 100 mA; 4.2 V DC with LED and 10 Ω at 100 mA |
| Cable connection | 4 conductors; minimum 0.25 mm² (24 AWG); lengths 2 m, 5 m, 10 m or M8 connector |
| Maximum ratings | 0.4 A, 100 V DC, 10 VA |
| Contacts | 2 NC switches (closed with coded magnet) |
With an appropriate monitoring system and correct wiring, it can reach Cat. 4 / PL=e per EN/ISO 13849-1 and SIL 3 per IEC 61508.
They have obtained UL/cULus certifications.
Typical cable lengths are 2 m, 5 m, and 10 m, or an M8 connector.
The minimum conductor wire size is 0.25 mm² (24 AWG).