Celduc SO942960 single phase power solid state relay datasheet covering output, control, thermal, wiring and installation specifications.
The Celduc SO942960 is a single phase power solid state relay in the okpac range. It is a zero cross relay intended for resistive loads (AC-51), with an output of 12 to 280 VAC at 25 A and a control voltage range of 185 to 265 VAC/DC. A green LED indicates the input, and IP20 protection is provided by removable terminal flaps.
The document gives output, control and general characteristics, thermal curves and heatsink selection, overload current data, control and power wiring, and terminal and label details. It states that the SSR must be mounted on a heatsink and that semiconductor relays do not provide galvanic insulation between the load and the mains, so an adapted circuit breaker with insulation feature or similar device must be used. This manual is written in French.
| Output | 12 to 280 VAC, 25 A |
|---|---|
| Control voltage range | 185 to 265 VAC/DC |
| Load type | Resistive loads (AC-51) |
| Typical application | 4 kW resistor at 230 VAC |
| Protection level | IP20 |
| Standards conformity | EN60947-4-3 (IEC947-4-3), UL/cUL |
| Short circuit protection fuse | FERRAZ gRC 25A 14x51 |
| Control wiring wire range | 0.75 to 2.5 mm² (AWG18 to AWG14) |
| Power wiring wire range | 1.5 to 10 mm² (AWG16 to AWG8) |
| M5 screw tightening torque | Min 2 / Typ 2.4 / Max 3 N·m |
The relay has an output of 12 to 280 VAC at 25 A.
It accepts 185 to 265 VAC/DC.
Yes, the relay must be mounted on a heatsink.
It is designed for resistive loads (AC-51), such as a 4 kW resistor on 230 VAC.