Celduc ESUC0450 current monitoring module for SU/SUL solid state relays monitors up to five heating loads and detects open load, shorted SSR and leakage…
Celduc ESUC0450 is a current monitoring module used with celduc SU/SUL solid state relays. It monitors one or more heating loads, up to five in parallel, and detects open mains, open load, partial load break, short-circuited SCR and leakage current.
The module learns the teach current through the TEACH pushbutton or an external teach input. It uses an alarm threshold of 0.84 times the teach current and indicates faults through a diagnostic output and LEDs. Control characteristics, teaching sequences and wiring diagrams are included. This manual is written in French.
| Current range | 2-40 A |
|---|---|
| Supply voltage | 8-30 VDC |
| Diagnostic output | 8-30 VDC, 0.1 A |
| Alarm threshold | 0.84 x teach current (-16%) |
| Maximum loads | 5 heating loads |
| Protection rating | IP20 |
| Conformity | EN60947-4-3 |
| Teach current range | 2-40 A rms |
| Short activation | <2 s (test mode) |
| Long activation | >3 s (teach mode) |
The alarm threshold is 0.84 times the teach current (-16%).
It can monitor up to five heating loads switched by a standard celduc solid state relay.
Press or activate the TEACH pushbutton or external teach input for more than 3 seconds.
The green INPUT and yellow ON LEDs flash alternately to indicate that diagnosis is impossible.