User manual for the BANTE PHscan 30F pen-style pH meter, covering setup, calibration, measurement, maintenance, troubleshooting, and specifications.
The BANTE PHscan 30F is a pen-style pH meter with an LCD display, automatic temperature compensation, support for 1 to 3 point pH calibration, and manual or automatic data hold. It can use USA or NIST pH buffer standards and shuts off automatically after 8 minutes without key operation.
The manual explains power on and off, setup menu options, pH and temperature calibration, pH measurement, electrode cleaning and maintenance, electrode and battery replacement, troubleshooting codes, technical specifications, and warranty terms. This manual is written in Chinese.
| pH measurement range | -1.00 to 15.00 pH |
|---|---|
| pH measurement accuracy | ±0.01 pH |
| pH calibration points | 1 to 3 points |
| pH buffer standards | USA (pH 4.01/7.00/10.01) or NIST (pH 4.01/6.86/9.18) |
| Temperature compensation range | 0 to 60 °C (32 to 140 °F) |
| Temperature compensation | Automatic |
| Temperature measurement range | 0 to 60 °C (32 to 140 °F) |
| Temperature measurement accuracy | ±1 °C |
| Temperature calibration range | Measured value ±10 °C |
| Data hold | Manual or automatic endpoint lock |
| Power off mode | Manual or automatic after 8 minutes without key operation |
| Sensor type | E-PHSCAN-FT |
| Operating temperature | 0 to 60 °C (32 to 140 °F) |
| Power supply | 2 x 1.5 V AAA batteries |
| Dimensions | 185 (length) x 40 (diameter) mm |
| Weight | 100 g |
Hold the MEAS key for 3 seconds.
Yes, after 8 minutes without key operation.
1 to 3 points.
USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18).
One year from the date of shipment; the sensor and calibration solutions are not covered.