Bante IE-20T Industrial pH Electrode User Manual

This document introduces an industrial electrode that is suitable for detecting the pH and temperature of water solutions. The electrode has a wide measurement range and can operate within the pH range of 0 to 14. It is also equipped with a temperature sensor for measuring within the temperature range of 0 to 60°C. The electrode has high pressure resistance and weather resistance, making it suitable for continuous measurement in industrial processes. The document also provides information on various installation methods for the electrode, as well as maintenance methods and optional accessories.


Bante IE-20T Industrial pH Electrode User Manual - cover page
Brand
BANTE
Document type
User Manual
Language
Chinese
Pages
3
File format
PDF
File size
304 KB
Updated
28 September, 2023
MD5 checksum
F890F408B3DABF0714F87423B1852AB8

About this manual

The Bante IE-20T is an industrial pH electrode designed for continuous measurement of pH and temperature in water solutions. It features a PPS/PC housing, Ag/AgCl reference type, and an NTC 10 KΩ temperature sensor with a range of 0 to 60°C. This manual is written in Chinese.

What's inside

  • Technical Specifications
  • Installation Selection
  • Electrode Installation
  • Electrode Immersion Solution
  • Routine Cleaning
  • Maintenance for Contaminants
  • Long-term Storage
  • Optional Accessories

Specifications

Measurement Range0 to 14 pH
Temperature Sensor TypeNTC 10 KΩ
Operating Temperature0 to 60°C (32 to 140°F)
Maximum Pressure Resistance0.6 MPa (87 PSIG)
Housing MaterialPPS/PC
Reference TypeAg/AgCl
Electrode Diameter29.5 mm (1.16 in.)
Thread Type3/4 inch NPT
Standard Cable Length5 m (16.4 ft.)
Maximum Transmission Distance30 m (98.4 ft.)

Frequently asked questions

What is the recommended immersion solution for long-term storage?

Add electrode immersion liquid inside the transparent protective cap and install it on the pH electrode.

Can I use distilled water to soak the electrode?

No, do not use distilled or deionized water as it will exhaust the hydration layer of the pH sensitive membrane and cause permanent damage.

How should I clean the electrode for oil or grease contamination?

Soak the electrode in flexible detergent for 30 minutes, rinse with water, and immerse in electrode immersion solution for about 1 hour.

What is the procedure for cleaning solid deposits?

Soak the electrode in 0.1M hydrochloric acid for 10 minutes, rinse with water, and immerse in electrode immersion solution for at least 6 hours.

Download PDF (304 KB)

More BANTE Manuals


View all BANTE manuals →